amroth
join:2009-06-26
| [Tomato] Problems with Tomato 1.25 on a WRT54GL
Recently I got a WRT54GL router and decided to throw tomato on it. I went and grabbed the BIN, everything worked fine from the start. Then about 10 minutes into using it I get this in the log every thirty seconds:
Now I understand its restarting every 30 seconds about (The Connection Up time on the status page also says this), but why? Is this a known bug, or is it something I did? All I have done is forward some ports for my Magic Jack, nothing more. Would using an older version fix this, and where could I find it. I've been searching this for quite a bit, and have found no help. So, anyone know why this could be? I also know its the router because when I remove it and have 1 computer hooked right to the modem, everything is perfect. Please help! |
|
KoRnGtL15
Premium
join:2007-01-04
Grants Pass, OR
2 edits | 1.25 has some issues. If you want stability. Go back down to 1.23 Also. After installing Tomato. Did you clear NVRAM? (thorough) UPnP support works great with Tomato if you are interested in that. Then you would not have to forward ports. |
|
mau108
Mau
Premium
join:2001-10-07
Thornhill, ON
clubs: | reply to amroth
Use Victek's build, much more optimized and yes 1.25 has problems. He is still using 1.23 base.
»victek.is-a-geek.com/tomato.html
I would use the ND version on your GL. |
|
koitsu
Premium
join:2002-07-16
Mountain View, CA
| reply to amroth
Administration -> Configuration -> Restore Default Configuration -> select "Erase all data in NVRAM memory (thorough)", click OK, and wait a few minutes for the router to come back up.
Chances are after you do this your problem will be solved.
--
Making life hard for others since 1977.
I speak for myself and not my employer/affiliates of my employer. |
|
