burner50
Pinlifter
Premium,VIP
join:2002-06-05
EN22wm | reply to Ender3rd
Re: Ooops, there goes my bargain DVM!
My luck it would have happened to my fluke... |
|
Ender3rd
join:2001-07-15
East Granby, CT
 ·Cox HSI
| 
It lives again... |
Yes, the AM rig is completely restored and up and running once again. I've had a lot of fun with it on 160/75/40 meters the past couple of weeks. Amazingly, the very first contact I made with it, an SWL made an mp3 of some of the audio and emailed it to me. Doesn't sound too bad considering its age and the fact that the audio had no compression or limiting!
»members.cox.net/w1aex/V3.mp3
--
My Jeep is not an SUV. Your SUV is not a Jeep. |
|
SmokChsr
Who let the magic smoke out?
Premium
join:2006-03-17
Saint Augustine, FL
| reply to burner50
said by burner50  :My luck it would have happened to my fluke... I'd probably cry if I did that to my Fluke 8060A, Unfortunately I did do that to my Beckman a long time back. I was metering around 800VDC, and the reading kept getting lower. I pulled the meter probe back and it pulled an arc. I thought that was a bit odd so I had to try it again 2-3 times, each time it pulled an another arc. I then looked back at the meter and noticed a wisp of smoke come out. OOPS!!
Now days, if I'm going over 500V the HV probe comes out. |
|
drjim
Premium,MVM
join:2000-06-13
Torrance, CA
clubs: | reply to Ender3rd
That's your home-brew rig, isn't it? |
|
Ender3rd
join:2001-07-15
East Granby, CT
·Cox HSI
| 
Thordarson CHT-300 |
The Viking used to reside in a 6 foot rack next to the homebrew transmitter, but it was really under-utilized in the basement. So, over the past month I rebuilt it into a smaller rack and moved it upstairs to the more frequently used station. My wife's only comment was, "Is that going to be staying there?" 
Above is a picture of the modulation deck as it was being rebuilt.
--
My Jeep is not an SUV. Your SUV is not a Jeep. |
|
drjim
Premium,MVM
join:2000-06-13
Torrance, CA
clubs: | Cool! I thought the knobs and VFO dial had a familiar look to them.....
--
One man's Magic is another man's Engineering. |
|
