paranoi7
join:2008-01-17
| Linksys SPA 2102
I just got a hand on a Linksys SPA 2102 ATA adapter and I am having trouble accessing its setup page. How do get into the admin setup? Do I need to unlock it first? I tried following some of the instructions that I found, (connecting, calling #### and password) but they didn't work.
Any help is much appreciated. |
|
voiplover
Premium
join:2004-05-28
Portsmouth, NH | If the ATA was originally from SR, then there is a cd imaige that can set the PW back to a known one that SR used. Do a search. |
|
Sly
Premium
join:2004-02-20
Johnson City, TN
clubs:
 ·Packet8
·Callcentric
 ·Comcast Formerly ..
1 edit | reply to paranoi7
The SPA 2102-r is set to auto provision out of the box. If you do a hard reset on it, it will clear the password but it will then connect to the SIP server and set a new password...
You can get around this by disconnecting the SPA from the internet. Easiest way is to turn your modem off. Do a hard reset and it will clear the password. Then log onto it and turn off provisioning. Now you can turn your modem back on and reboot. Now it will not set a password and you can get into it to set your own.
--
"The penalty good men pay for indifference to public affairs is to be ruled by evil men."
- Plato - |
|
hardly
join:2004-02-10
USA
| said by Sly  :The SPA 2102-r is set to auto provision out of the box. . . How about SPA2102-R1 ?
Does it act that way too? |
|
Sly
Premium
join:2004-02-20
Johnson City, TN
clubs:
·Packet8
·Callcentric
·Comcast Formerly ..
| Can't tell you for certain. I have 2102-R model and that's what it took to get the password off it.
There are other ways to get the password off including setting up a web server and fooling the SPA to update off your server rather than the SIP server. This way you can make it upgrade to whatever firmware you want and in the process, set the password to something known. I choose to do mine a different way and it works fine for me.
One drawback that I've seen with my SPA is that only line 2 is unlocked. After I cleared the password and turned off autoprovisioning, I couldn't get line 1 to take any custom settings. It was provisioned with Broadvoice and won't let me change anything even with admin rights. However line 2 is now unlocked and that's what I set up my Callcentric account with...
--
"The penalty good men pay for indifference to public affairs is to be ruled by evil men."
- Plato - |
|
meister_sd
Premium
join:2006-01-29
La Mesa, CA
| reply to paranoi7
There are a few providers who used this device. If it's been connected to the internet, it may tell you on the main screen, like Sunrocket, Gobalinx, etc...
From what I've seen, the 2102's that were programmed for Sunrocket and haven't been on the 'net before, they won't provision. Their info is gone off Sipura's website.
The other way is to sniff the WAN port and see where it's going. |
|
Fencepost
join:2009-09-07
Downey, CA
| reply to paranoi7
Here's a detailed tutorial for unlocking a Sunrocket ATA:
»www.fromthefencepost.com/2009/07···pa-2102/
Here's another tutorial for setting up the admin settings. It's specific to Google Voice and Gizmo, but may be helpful for your application:
»www.fromthefencepost.com/2009/07···e-voice/
Hope this helps.
--
Detailed instructions and tips for Google Voice, Gizmo5, Linksys SPA2102, and Nokia N810: »www.fromthefencepost.com/categor···-gizmo5/
My home page: »www.FromTheFencepost.com/ |
|
