dcurrey
Premium
join:2004-06-29
 ·ViaTalk
| reply to wesj
Re: [Equipment] Teleblend and Meucci Solutions
A couple of things.
1. Your ata needs to be behind the router. Without being in the routers DMZ. You may need to forward ports for this to work.
2. Pap2 type devices have a setting to ignore calls that do not come for the sip server. (Restrict Source IP)
3. Grandstream ata setting to do the same as pap2. May require firmware update.
4. Move sip off port 5060
With teleblend the only option I think you have is 1. You have locked ATAs. Not sure what they furnish or if you are using an old Sunrocket ata. Anyfirmware or config changes have to be done by Teleblend.
Follow the links above for more info on this. Think they cover the above ideas and a couple more. |
|
TBSupport1
join:2007-09-11
Leesburg, VA | We can also move you off of port 5060 as well. Just PM your ticket number and I will take a look and get you setup. |
|
voiplover
Premium
join:2004-05-28
Portsmouth, NH |  reply to dcurrey
Try changing your IP address. If you can, it should solve your problem. |
|
dcurrey
Premium
join:2004-06-29 | That would only stop it until the ata was scanned again. |
|
voiplover
Premium
join:2004-05-28
Portsmouth, NH
·callwithus
·Axvoice
| Ya well, it's believed that they are capturing IP addresses by posting info or adds about voip. Then doing a sip to sip call to those IP addresses. If you change your IP address and don't go to there site then the calls should stop. Plain and simple cure. |
|
