| How can I open my NAT? Hello. I have the Motorola NVG510 that I use with my U-verse internet. How do I change my NAT settings from strict to open? Please help? Ive asked everywhere but all I get is how to open it the NAT on the 2210. I even called ATT and they told to to google it, which I did and I found nothing. Please help!! I am not very computer savvy. |
|
| This is concerning Xbox live |
|
 wayjacPremium,MVM
join:2001-12-22
Indy | Use the ip passthru option |
|
| reply to mclovin_it
open firewall, then config packet filter and gaming nat then you have to go too xbox 360 network settings and configure network manual |
|
|
|
| Can you explain it in more detail please? Lol I am really clueless when it comes to these things. |
|
wayjacPremium,MVM
join:2001-12-22
Indy | The modem has a page like the one below can you locate that page
|
|
| Yes I found it. Allocation mode is off. Should I change it to default server, passthrough, or leave it off? |
|
wayjacPremium,MVM
join:2001-12-22
Indy | Yes, If you know the ip address of the xbox select default server
You can also try the passthrough but after making that selection you must reboot the xbox and make sure it has a public ip address
With either option the xbox must/should be set for a dhcp/automatic connection |
|
| reply to mclovin_it
packet filter, enable filter on, filter rules entry action on, ip address range you router address 192.168.1.254 destination ip address 192.168.1.? any number fronm 5 to 250. then tcp, source port 3074 destination port 3074 hit add, then samething over but change tcp to udp hit add then save. nat gaming, service aim talk,need by device 192.168.1.? whatever you picked. in xbox network setting do manual ip, what ever you picked , subnet mask 255.255.255.0 i think, gateway your router address 192.168.1.254 i think. hope this helps |
|
| reply to wayjac
I had to open nat/gaming and packet filter to get nat all the way open |
|
| reply to mclovin_it
Thank you guys for your help, but I finally did it. I looked at my xbox IP adress, then i went to the Game/NAT section of my modem settings. There I clicked on xbox 360 and then I saw that where it said need by device had 2 ip adresses, one of which matched my xbox. so I clicked on that one then add. Boom open NAT!! I had just press add and left it on the yourcomputer option. THANK YOU GUYS FOR YOUR HELP!!! Now on to play some Gears of War® |
|
| hello mclovin_it, can you provide a step by step list on how you did it? i can't seem to make it work |
|
