 meskinctMad Scientist at WorkPremium
join:2002-01-07
Southbury, CT
 ·Charter
·Comcast
| reply to EG
Re: Zoom 5341G (4x4) vs Zoom 5341J (8x4) said by EG:that besides not seeing the naming of the config file that there is no error logging in the U.I. either.
But it appears that there may be! It's just not a visible link that's clickable in the standard GUI. In my 5341J I go to »192.168.100.1/RgEventLog.asp
and I get a log page
Status
SNMP Event Log
This page displays the contents of the SNMP event log.
Time Priority Description
Wed Dec 21 04:14:17 2011 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=0xxxxxxxxxxxx
Wed Dec 21 04:14:08 2011 Error (4) DHCP RENEW sent - No response for IPv4;CM-MAC=xxxxxxxxxxxxx
Wed Dec 21 04:14:08 2011 Critical (3) DHCP RENEW FAILED - Critical field invalid in response
--
Rich. My Website |
|
|
|
 EGThe wings of lovePremium
join:2006-11-18
Union, NJ
kudos:9 | said by meskinct:said by EG:that besides not seeing the naming of the config file that there is no error logging in the U.I. either.
But it appears that there may be! It's just not a visible link that's clickable in the standard GUI. In my 5341J I go to » 192.168.100.1/RgEventLog.asp NICE FIND !!! Thank you !! 
Now try to find the config file data please !!!  |
|
KevTechPremium
join:2002-08-22
Seattle, WA | The log does show your CM file name when the modem downloads it but is abbreviated. |
|
EGThe wings of lovePremium
join:2006-11-18
Union, NJ
kudos:9 | I don't see that here. Even after a powercycle operation or a full reset back to factory defaults. |
|
 RipperPremium
join:2002-02-07
West Palm Beach, FL | reply to meskinct
Great find on the log page ! I made it a bookmark.Thanks |
|
KevTechPremium
join:2002-08-22
Seattle, WA | reply to EG
What I did was pushed and held the reset button on the back until all lights went out except the power light then I released the button.
Why this worked and reset in the GUI does not I have no idea. |
|
RipperPremium
join:2002-02-07
West Palm Beach, FL Reviews:
·Comcast
| said by KevTech:What I did was pushed and held the reset button on the back until all lights went out except the power light then I released the button.
Why this worked and reset in the GUI does not I have no idea.
Yep that worked,and it stays in the log unlike some modems. |
|
KevTechPremium
join:2002-08-22
Seattle, WA | Logs Maybe push and hold the reset button would work on the surfboard modems as well. |
|
EGThe wings of lovePremium
join:2006-11-18
Union, NJ
kudos:9 | reply to KevTech
Re: Zoom 5341G (4x4) vs Zoom 5341J (8x4) said by KevTech:What I did was pushed and held the reset button on the back until all lights went out except the power light then I released the button.
That's what I did and no go... 
What version of firmware (software) do you guys have ? Here's mine; 5.5.4.4J |
|
RipperPremium
join:2002-02-07
West Palm Beach, FL | That's the same firmware I have. |
|
KevTechPremium
join:2002-08-22
Seattle, WA | reply to EG
Did you make sure to hold the button in until the lights went out?
I have the same firmware. |
|
EGThe wings of lovePremium
join:2006-11-18
Union, NJ
kudos:9 | said by KevTech:Did you make sure to hold the button in until the lights went out?
I have the same firmware.
Yup... Thanks for the info. |
|
Reviews:
·Comcast
| reply to meskinct
good find...thanks...I got this: |
|
