dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
3
share rss forum feed

goose1000

join:2010-11-13
reply to wayjac

Re: [Xtreme] AT&T threaten me..I think!

I think this is it the ATTNDR: Check out my loop length, that looks high doesn`t it?

Downstream Upstream
----------------------------------------
Interlv delay 64 2
LowestTone 32 6
HighestTone 197 22
TonesExcited 164 17

NetRate 3550 382
AggrRate 3566 395
TotalRate 3820 528
LineRate 4164 580
ATTNDR 5504 647

ACTATP 184 105
ACTPSD -367 -345
HLINSC 3046
Estimated loop length: 14480 feet (bridge tap)


NetFixer
Freedom is NOT Free
Premium
join:2004-06-24
The Boro
Reviews:
·Cingular Wireless
·Comcast Business..
·Vonage
said by goose1000:

Check out my loop length, that looks high doesn`t it?...

Estimated loop length: 14480 feet (bridge tap)

Yes, if your loop length were actually 14480 feet, it would be rather long for a 3 mbps connection (and the "bridge tap" would also seem to be a bit foreboding. However, it is not unusual for an inexpensive (inexpensive compared to real DSL test equipment) DSL modem to report both of those things incorrectly.

FWIW, I think you are looking in the wrong place again. Your problem is the noise on your telco line, it does not really appear to be a "DSL" problem (although a bridge tap ...if there is one... could be a potential entry point for noise).
--
We can never have enough of nature.
We need to witness our own limits transgressed, and some life pasturing freely where we never wander.

goose1000

join:2010-11-13
Yea...I was just snooping around in the stats..I have not given up on the telco line yet. I got someone higher up than the local supervisor taking a look at it. Hopefully should hear something Monday or Tuesday.


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to NetFixer
I asked to see that info just to satisfy my curiosity

goose1000

join:2010-11-13

1 edit
How can I get an accurate loop length?


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to goose1000
said by goose1000:

I think this is it the ATTNDR:

Yes, the 3347 attndr and the 2wire max rate are the same, different terms used to describe the same thing
said by goose1000:

Check out my loop length, that looks high doesn`t it?

Yes I think that figure is too high for the sync rate you have but the attndr figure contradicts that

I've found that the estimated loop length figures given by the motorola modems are close to the loop length figures given by att techs who have access to that type of info


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to goose1000
said by goose1000:

I can I get an accurate loop length?

A few years ago I requested that info in a post in the direct forum

goose1000

join:2010-11-13
Well I was on 1.5 before and had same disconnect issues as I am having now..I thought it would have been more stable connection but it did not matter by dropping speed.