dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
29
share rss forum feed


Brano
I hate Vogons
Premium,MVM
join:2002-06-25
Burlington, ON
kudos:10
Reviews:
·TekSavvy DSL
·Bell Fibe
reply to mikepd

Re: USG200 IP address problem

said by mikepd:

The problem I am having is that while the USG200 has a 192.168.1.1 IP, the Rosewill RNX-EasyN4 router repeater has an address of 192.168.0.1.

There does not seem to be a way to change the repeater IP that I can find so can I change the USG200 to the address required to use the repeater?

You can do this in multiple ways.

1) Change USG 200 LAN1 to 192.168.0.x

2) Keep USG LAN at 192.168.1.x and add LAN2 as 192.168.0.x and configure static routes between the LAN1 and LAN2

3) Keep USG LAN and configure IP alias for 192.168.0.x

4) Use VLANs if you have VLAN capable switch

I'd say option 1) is the easiest, just change USG's IP to something else let's say 192.168.0.254 and you're done. Make sure DHCP won't include 192.168.0.1 to prevent possible IP conflict.


mikepd
Discovery
Premium,MVM
join:2000-10-26
New Port Richey, FL

Thanks Brano, as that seems to be the simplest solution to just change the USG 200 to match the repeater.

I'll post back with the results.

All the best,

Mike
--
Always Reach Beyond Your Grasp



mikepd
Discovery
Premium,MVM
join:2000-10-26
New Port Richey, FL
reply to Brano

Thanks, Brano that worked. I set LAN1 to 192.168.0.x and it connected fine.

All the best,

Mike
--
Always Reach Beyond Your Grasp