mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
 ·Start Communicat..
 ·TekSavvy Cable
·TekSavvy DSL
| reply to mlord
Re: Upgrading Firmware on Thompson DCM475
Up-to-date, at last! |
Also verified that the MAC address is still the original, and it is.
 |
|
|
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
·Start Communicat..
·TekSavvy Cable
·TekSavvy DSL
| 
Sparkfun Arduino Pro Micro 3.3V |
|
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 | reply to mlord
So.. anyone else in Ottawa need/want their DCM-475 upgraded to Stac 02.16 firmware? |
|
 TSI GabePremium,VIP
join:2007-01-03
Chatham, ON
kudos:2 | Well...I do live in Ottawa  |
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
·Start Communicat..
·TekSavvy Cable
·TekSavvy DSL
| said by TSI Gabe:Well...I do live in Ottawa :) you are quite welcome to check it out, if you like.
Just PM me (you or anyone else who is interested). |
|
 damirSFRJPremium
join:2003-05-24 | How much would you charge me to do this for me if i ship you the modem?
--
www.urimage.net - Free Image Hosting |
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
·Start Communicat..
·TekSavvy Cable
·TekSavvy DSL
| said by damir:How much would you charge me to do this for me if i ship you the modem? I plan to only do local modems in the Ottawa area for now.
Perhaps you might contact user Teddy Boom (send him a PM from this site) and inquire there?
Cheers |
|
damirSFRJPremium
join:2003-05-24 | ok. tnx |
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
·Start Communicat..
·TekSavvy Cable
·TekSavvy DSL
| reply to mlord
said by mlord:Same deal. I replaced image0 at first, but the modem came up as 02.08 still. Then I flashed the exact same firmware into image1, and.. presto! Okay, I've just now upgraded a second modem. This time, we tried the second image location first, and it worked. So no need to overwrite both images, just the second one.
Cheers |
|
| said by mlord:said by mlord:Same deal. I replaced image0 at first, but the modem came up as 02.08 still. Then I flashed the exact same firmware into image1, and.. presto! Okay, I've just now upgraded a second modem. This time, we tried the second image location first, and it worked. So no need to overwrite both images, just the second one. Cheers And I am connecting with no problems so the flash was good.
Now to see if it has resolved the periodic disconnect problem. |
|
| reply to mlord
I am interested but I am not having any major issues with the modem atm. |
|
| reply to mlord
Mlord, I'm in Ottawa, in Orleans. How long does the flash take if I'm able to drop it off to you?
Thanks for all your work on this one! |
|
| It takes about 20 minutes but you may want to plan to be there for a half hour, just in case. |
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 | reply to Shoeman1975
Lothario & Shoeman1975,
Allow about 30 minutes, start to finish, for updating the modem.
If you (or others) want this done, then PM me (click on mlord at left, and send me a Private Message aka. "PM").
Cheers |
|
| reply to mlord
Been running the updated firmware for a week now with no problems. It also appears to have resolved my periodic disconnect/reconnect problem which was my impetus for getting the upgrade done in the first place.
Thanks again for the help mlord. |
|
| Do you have channel bonding yet? My modem has been relatively ok but am still getting it upgraded. |
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
·Start Communicat..
·TekSavvy Cable
·TekSavvy DSL
| reply to mlord
said by mlord:The final version of the flash rig. Pretty darned simple. I've now got a simplified flashing rig on the breadboard.
Simpler? How?
Well, this one doesn't require a PC at all. I've coupled a raw Atmel ATMega328 chip (aka. "arduino") with an SD Card socket. Put a firmware.img file onto an SD Card and the "arduino" reads it and flashes the modem with it.
No PC, no slow serial connection. So the flashing now takes under three minutes for a 2MB image. Still glacial compared with the theoretical speeds, but 2X the speed of the earlier setup!
I'll probably solder up a board with this one on it, to free up the breadboard for other uses. Some pix coming later.
-ml |
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
·Start Communicat..
·TekSavvy Cable
·TekSavvy DSL
1 edit | 
The latest SD-Card based flashing rig. |
said by mlord:I've now got a simplified flashing rig on the breadboard. This is the latest incarnation of the flashing rig.
Standalone (no Linux PC required), turnkey.
Requires a DC power source (4V - 16V), and not much else.
The firmware.bin file is read from the SD-Card and written automatically to both flash partitions, if not already in each. |
|
mlord
join:2006-11-05
Nepean, ON
kudos:9 Reviews:
·Start Communicat..
·TekSavvy Cable
·TekSavvy DSL
3 edits | 
The latest SD-Card breadboard arrangement. |
|
|
| Is there anyone doing this near markham, Ontario? |
|
