scross
join:2002-09-13
Cordova, TN | reply to robbin
Re: Need some plumbers opinions. A closer look at the specs shows 2.5 gpm for EACH large head, and 1.75 gpm for EACH small head. So that's potentially 12 gpm with everything running at full blast. Not exactly "low flow", now is it? |
|
iknowPremium
join:2012-03-25 | said by scross:A closer look at the specs shows 2.5 gpm for EACH large head, and 1.75 gpm for EACH small head. So that's potentially 12 gpm with everything running at full blast. Not exactly "low flow", now is it?
that's "low flow" per head. i came across info on something similar, and all the heads could be operated at once!., that was a selling point they made. |
|
scross
join:2002-09-13
Cordova, TN | said by iknow:that's "low flow" per head. i came across info on something similar, and all the heads could be operated at once!., that was a selling point they made.
IIRC, my low flow heads are 1.5 gpm, and AFAIK are required in this area, even though currently there is plenty of water to go around. I'm used to this flow rate now, but as I said, that one in Chicago was really nice! |
|
