|reply to authur |
Re: My four out of nine stations won't come on
Is the module for stations 1 to 4 the correct module for a nine station timer. You state that it is a nine station timer but the sum of outputs is ten. I had an earlier rain bird timer that had three station outputs built in and room for two additional three zone modules. Check to see if the first module is the right one for the timer. If the first module station 1 to 4 is removable switch it with one of the other modules to see if a different module works properly when in the first slot.
That is correct. My timer had 3 modules and organized as first module controls 4 stations while other two each controls 3 stations. I left station#10 with no connection. As I mentioned, I did swap station #1 (Module 1) with station#9 (Module 3) but did not swap whole Module. I thought that swapping stations out of modules should prove that no issue with module 1, right ?