dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
7
share rss forum feed

wysiwyg1972

join:2006-11-05
Toronto, ON
reply to wysiwyg1972

Re: Ultimate - Stuck on 75/2 (new Subscriber)

My package is indeed ultimate as it shows this on "my Rogers". I was transferred to customer service but they were down as well.. I will have to try them today.

Thanks all!

yyzlhr

join:2012-09-03
Scarborough, ON
kudos:4
said by wysiwyg1972:

My package is indeed ultimate as it shows this on "my Rogers". I was transferred to customer service but they were down as well.. I will have to try them today.

Thanks all!

Both the 75/2 and 150/10 are branded as ultimate from a customer perspective.

Rayson

join:2004-01-01
Canada
said by yyzlhr:

Both the 75/2 and 150/10 are branded as ultimate from a customer perspective.

IIRC, it's not the first time that the account profiles are not setup correctly!

Note that there are 2 main speed limits that a cable modem connection has:

- the speed limit imposed by the physical cable connection (ie. line quality).

- the speed limit capped by the DOCSIS config file. Note that by replacing this config file you can uncap the modem and get full speed of the cable internet connection. (Don't try this at home!)

In the old days, I used to use the open source DOCSIS ( »docsis.sf.net ) tool to download and view the config file. I have not tried it again with newer modems - yet there are many tools on the net that you can use to download the DOCSIS config file.

I think one can still pull the DOCSIS config file easily from Rogers' TFTP server, but I haven't tried this for many years as these days I work on other stuff and thus I pay much less attention to the network layer.

And FYI: »www.cisco.com/en/US/docs/net_mgm···p_6.html

Rayson

==================================================
Open Grid Scheduler - The Official Open Source Grid Engine
»gridscheduler.sourceforge.net/

Scalable Grid Engine
»blogs.scalablelogic.com/


BliZZardX
Premium
join:2002-08-18
Toronto, ON
You can't uncap cable modems ever since BPI+. Rogers probably invested more resources in network security than any other North American MSO. Not so many years ago, it was possible to find uncapped cable modems, along with bootleg DVDs and other counterfeit merchandise sold in broad daylight at Pacific Mall in Toronto. A lot of these operations got busted, and rightly so. They (along with vendors, CableLabs etc) regularly have people browsing sbhacker and other "experimental" forums to look for the latest hack so they can be the first to patch it. The most you can do these days is clone a modem of another user, on another headend, subscribed to a different service. The usage is still logged though, and if you go over the cap, they pay... if they did not consent to the extra usage charges, and its reported, his MAC will be taken off the network.
--
Fiber Optics are the future of high-speed internet access. Stop by the BBR »Fiber Optic Forum.

DJ411

join:2009-12-31
reply to wysiwyg1972
Check your bill, if its around $99 for the service then your getting the old Ultimate package. That is the package i get. Lucky enough i get a 80-110mb download and a 1.9mb upload and a 20% discount i'm ok with it. If your paying for i think $120 and getting those speeds then you might have to wait until Dec 1st from what i'm seeing that is when the new speeds kick in. If that isn't the case then there is an issue.

wysiwyg1972

join:2006-11-05
Toronto, ON
That was the exact issue. There are 2 ultimate packages. I asked for 150/10 and was offer it for $75 after 25% discount. I finally got a rep that figured it out and changed me to the correct 150/10 package and I then got the new correct speeds. I then got an email confirmation:

Remove ultimate $99.99
Remove 25% discount
Add ultimate $122.99
Add 25% discount

Called retention to complain, they told me about the 2 packages. I told them I needed the fast upload speeds for the $75 quoted price. The rep switched me back to the $99 package and enabled the fast upload speeds. At last check, I was still getting 150/10, even after reboot of the gateway. Never got another email confirmation, so will need to confirm the pricing.

I also enabled bridge mode on the gateway, hooked my own router, tweaked the MTU to a lower setting (1450) and the Slingbox connection has been smoother across the pond.