 SteveConIBEW 2222 Boston, MAPremium
join:2004-09-02
Boston, MA | reply to zippoboy7
Re: Missing red "add" text on "Port Forwarding&qu THIS is what I am expecting. It is nowhere to be found. It is impossible to edit on my screen - you must delete & recreate to do that. All of the instructions from VZ, Actiontec, and Youtube videos that I have seen all talk about this screen - not the one I get. |
|
 birdfeedrPremium,MVM
join:2001-08-11
Warwick, RI
kudos:8 | What firmware revision is on your Rev.A router? Should be 4.0.16.1.56.0.10.14.4, then you'll get what you showed in your original post.
You're looking for the first step in port forwarding like you'll see here with 2009 firmware. »Re: Port Forwarding Stopped Working. No longer available.
Yes, there is no editing an existing rule. You can only delete then recreate. |
|
|
|
SteveConIBEW 2222 Boston, MAPremium
join:2004-09-02
Boston, MA | The Rev A router has been returned, so I don't know what the firmware rev level was. There is a ton of legacy (pre 2009 firmware) help articles out there. I tried to find out some info on firmware levels - but didn't learn very much. |
|
