dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
22
share rss forum feed

zrob_12

join:2009-01-17
reply to HELLFIRE

Re: ASR1002 VLAN

See below. Gig0/1/0 through Gig0/1/4 belong to VLAN1. Gig0/1/5 through Gig0/1/7 belong to VLAN2. Both VLANs are configured on the add-on module.

interface GigabitEthernet0/1/0
no ip address
!
interface GigabitEthernet0/1/1
no ip address
!
interface GigabitEthernet0/1/2
no ip address
!
interface GigabitEthernet0/1/3
no ip address
!
interface GigabitEthernet0/1/4
no ip address
!
interface GigabitEthernet0/1/5
switchport access vlan 2
no ip address
!
interface GigabitEthernet0/1/6
switchport access vlan 2
no ip address
!
interface GigabitEthernet0/1/7
switchport access vlan 2
no ip address
!
interface Vlan1
description $FW_INSIDE$
ip address 192.168.200.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip virtual-reassembly in
!
interface Vlan2
description $FW_INSIDE$
ip address 192.168.100.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in


tubbynet
reminds me of the danse russe
Premium,MVM
join:2008-01-16
Chandler, AZ
kudos:1
you're confused.
you've added 'switchports' to your router. your asr1k isn't in the same gimmicky 'everything in a single box' class as the isr/g2. the asr1k is an enterprise edge/sp pop router -- not a switch.

see nosx See Profile's post above. if you want to connect end hosts to this device -- you have to put a switch in place, then move the svi configuration above to tagged subifs on the asr1k.

q.
--
"...if I in my north room dance naked, grotesquely before my mirror waving my shirt round my head and singing softly to myself..."