dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
33
share rss forum feed


deekay0

join:2001-12-23
Toronto, ON
reply to masif

Re: Bell Canada Fibe25/10 can ping but cannot browse frequently

said by masif:

Yeah, not a single disconnect since 11-Dec, 10 days of non-disruptive service

My problem is gone.

Glad to hear that you have fixed your issue!

Do you know if the profile you were put on is an interleave profile? Have you noticed that your ping times have gone up?

Thanks


Glen1
These Are The Good Ol' Days.
Premium,MVM
join:2002-05-24
GTA Canada
kudos:8
Reviews:
·Bell Fibe

Pardon my interjection but all the profiles for VDSL2 are interleaved to some degree. Apparently there are 5 levels from low to high so most likely and hopefully his profile would be the lowest level and would introduce a small amount of latency. The interleave profiles on ADSL were very much greater than these and would introduce about 40 ms.
--
My Canada includes Quebec.
Disclaimer: If I express an opinion, it is my own opinion, not that of Bell or its related companies.


masif

join:2012-08-19
Mississauga, ON
reply to deekay0

Honestly speaking, it seems to me that ping times have improved

Pinging to 4.2.2.2, avg response time is 32ms.

Approximate round trip times in milli-seconds:
Minimum = 31ms, Maximum = 37ms, Average = 32ms



deekay0

join:2001-12-23
Toronto, ON

said by masif:

Honestly speaking, it seems to me that ping times have improved

Pinging to 4.2.2.2, avg response time is 32ms.

Approximate round trip times in milli-seconds:
Minimum = 31ms, Maximum = 37ms, Average = 32ms

--- 4.2.2.2 ping statistics ---
27 packets transmitted, 27 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 20.362/20.852/21.482/0.295 ms

What about a ping to google.ca (74.125.226.88)?
--- google.ca ping statistics ---
54 packets transmitted, 54 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 5.680/6.223/7.471/0.374 ms

I guess 10ms isn't that big of a deal, but it just seems technically wrong to use an interleave profile if the line is clean and the problem is related to something else.