 PoloDudePremium,VIP
join:2006-03-29
Northport, NY
kudos:3 | reply to TA63
Re: How to determine GPF of existing toilet? Get a gallon container.turn off the water to the tank. Flush the toilet. Refill the tank using the gallon container. do the math. |
|
| said by PoloDude:Get a gallon container.turn off the water to the tank. Flush the toilet. Refill the tank using the gallon container. do the math.
Woudn't take into account the water that goes down the refill tube into the bowl, which may or may not continue to run for a while after the bowl is actually full, wasting water down the drain. |
|
 shdesignsPowered By Infinite Improbabilty DrivePremium
join:2000-12-01
Stone Mountain, GA | reply to PoloDude
said by PoloDude:Get a gallon container.turn off the water to the tank. Flush the toilet. Refill the tank using the gallon container. do the math.
Also capture the water from bowl fill tube to see how much water comes out there. |
|
|
|
| Divert the refill tube into another container and measure the amount of diverted water. |
|
 jack bGone FishingPremium,MVM
join:2000-09-08
Cape Cod
kudos:1
1 edit | reply to Raphion
never mind |
|
