 XCOMdigitalnUllPremium
join:2002-06-10
Spring, TX
 ·flowroute
 ·Comcast
·voip.ms
·Callcentric
·SIPBRI
| reply to H_T_R_N
Re: Project: New office build out. said by H_T_R_N:No outlets on the new wall at all, or are they coming?
The systems will not be on the new wall so no outlets need it there. There is plenty of electrical outlets on the existing walls so we are good there. Is going to be too much work to run Cat6 to the wall where the systems are going to be so the idea is to run 100 cat6 cables behind the base board to the systems area.
Is hard to picture it right now but let me see if I can come up with a diagram so I can explain it better.
(Yes 100 is a joke... Is going to be 4 runs only  )
--
[nUll@dcypher ~]$ |
|
|
|
| Err, not to be a PITA but "you never can have too many outlets", and the NEC has rules.
Anyways Wire Mould(TM) makes solutions which would allow you to have power on that wall, be code compliant and be completely removable when/if the wall ever comes out.
Anyways its coming along very fast, you might get it done in a week! |
|
XCOMdigitalnUllPremium
join:2002-06-10
Spring, TX Reviews:
·flowroute
·Comcast
·voip.ms
·Callcentric
·SIPBRI
| said by Thane_Bitter:Err, not to be a PITA but "you never can have too many outlets", and the NEC has rules.
Anyways Wire Mould(TM) makes solutions which would allow you to have power on that wall, be code compliant and be completely removable when/if the wall ever comes out.
Anyways its coming along very fast, you might get it done in a week!
Mehhh.... True. I guess I can deal with it for now 
I am hoping that is all done this week end..
--
[nUll@dcypher ~]$ |
|
