| reply to Selenia
Re: [TWC] TWC DNS servers dont respond after awake from sleep said by Selenia:You are lucky. I can't even access the status page on this piece of junk. Really? Try going to »192.168.0.1 (if you're directly connected), and when prompted to log in, use user for both the username and password. |
|
 SeleniaI love DebianPremium
join:2006-09-22
Lanesboro, MA
kudos:2 | Tried it. My Arris responded to 192.168.100.1, which I tried before 192.168.0.1 and 192.168.1.1(just in case). However, this POS doesn't respond to any of the above. 0.1 and 1.1 time right out. 100.1 hangs, which tells me that might be the right address, but TWC did something to disable it. |
|
|
|
| said by Selenia:Tried it. My Arris responded to 192.168.100.1, which I tried before 192.168.0.1 and 192.168.1.1(just in case). However, this POS doesn't respond to any of the above. 0.1 and 1.1 time right out. 100.1 hangs, which tells me that might be the right address, but TWC did something to disable it.
Oh, whoops, I have a Ubee, not an Arris. |
|
SeleniaI love DebianPremium
join:2006-09-22
Lanesboro, MA
kudos:2 | I have a Ubee now. I am saying I had an Arris before and did not have these issues, including accessing the status page. |
|
cramer
join:2007-04-10
Raleigh, NC
kudos:7 | reply to novasource
That doesn't work if they've locked the gateway. Our BC service -- Ubee -- is locked. The issue appears to be that there's no "read-only" access for the thing; user/user would give us access to change things, which they really don't want. The previous unstable Arris had separate interfaces for the modem (:80) and router (:8080), so we could see the status without messing with any settings.
While I NEED to be able to see signal levels, they aren't going to give me access to change things just to see the status page. (sucks, and we've called twice because of cable side outages we couldn't see from our end. Luckily, we're calling a tech directly instead of the 30min-on-hold support number -- yes, he told us to do so.) |
|
