 pizzFiber pleasePremium
join:2000-10-27
Astoria, NY
 ·RoadRunner Cable
| [TWC] 8 Downstream Channels Added. I live in Astoria, Queens NY and with a reboot of my modem, it added 2 extra downstream channels.
Downstream
DCID Freq Power SNR Modulation Octets Correcteds Uncorrectables
Downstream 1 8 351.00 MHz 8.39 dBmV 37.09 dB 256QAM 744406994 0 0
Downstream 2 1 297.00 MHz 9.01 dBmV 38.26 dB 256QAM 335710768 0 0
Downstream 3 2 303.00 MHz 8.26 dBmV 38.26 dB 256QAM 282264660 0 0
Downstream 4 3 309.00 MHz 8.90 dBmV 38.26 dB 256QAM 355396002 0 0
Downstream 5 4 315.00 MHz 8.08 dBmV 37.94 dB 256QAM 290879247 0 0
Downstream 6 5 333.00 MHz 8.56 dBmV 37.94 dB 256QAM 451351345 0 0
Downstream 7 6 339.00 MHz 8.25 dBmV 37.36 dB 256QAM 408653871 0 0
Downstream 8 7 345.00 MHz 8.10 dBmV 36.61 dB 256QAM 595823929 0 0
--
It's ok to say, 'I don't know'. It's even better when someone takes the time to explain what you, 'don't know'. |
|
 kilrathi
join:2005-04-22
Rockaway Park, NY
·Time Warner Cable
| Same here, Rockaway Park, Queens.
Channel ID 8 1 2 3 4 5 6 7
Frequency 351000000 Hz 297000000 Hz 303000000 Hz 309000000 Hz 315000000 Hz 333000000 Hz 339000000 Hz 345000000 Hz
Signal to Noise Ratio 37 dB 37 dB 37 dB 37 dB 37 dB 37 dB 37 dB 38 dB
Downstream Modulation QAM256 QAM256 QAM256 QAM256 QAM256 QAM256 QAM256 QAM256
Power LevelThe Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
0 dBmV 0 dBmV 0 dBmV 0 dBmV 0 dBmV 0 dBmV 0 dBmV 0 dBmV
Change from 6 to 8 downstream channels occured around noon today. 345Mhz and 351Mhz are the 2 new channels. |
|
 Nick21
join:2010-02-03
New York, NY
·Time Warner Cable
| reply to pizz
In Manhattan and just rebooted manually, also got 8 downstream.
Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked QAM256 6 339000000 Hz -0.7 dBmV 37.1 dB 0 0
2 Locked QAM256 1 297000000 Hz -0.6 dBmV 37.2 dB 0 0
3 Locked QAM256 2 303000000 Hz -0.5 dBmV 37.2 dB 0 0
4 Locked QAM256 3 309000000 Hz -1.1 dBmV 36.5 dB 0 0
5 Locked QAM256 4 315000000 Hz -0.8 dBmV 36.4 dB 0 0
6 Locked QAM256 5 333000000 Hz -1.4 dBmV 37.1 dB 0 0
7 Locked QAM256 7 345000000 Hz -1.1 dBmV 37.1 dB 0 0
8 Locked QAM256 8 351000000 Hz -1.2 dBmV 37.0 dB 0 0
 |
|
|
|
| Same Here 8 Downstream, I did not have to reboot |
|
pizzFiber pleasePremium
join:2000-10-27
Astoria, NY | reply to pizz
do you all think faster speeds will be incoming? we need Hobgoblin or stevemehs on the case! |
|
 Steve MehsGun Control Is Using A Steady HandPremium
join:2005-07-16 | Why me? I don't work for Time Warner, I have no idea what their future plans entail or what’s in the pipeline. But with 8 bonded downstream channels, I think it is pretty safe to say faster speeds will be coming at some point. Whether it’s 75 Down like in Dallas or 100 Down like in KC, it would be anyones guess. |
|
 Miruki
join:2007-08-08
Brooklyn, NY | reply to Nick21
where are you? still 4down/2up in lower east side with a SB6141 modem.
standard plan. |
|
| reply to kilrathi
Went up from 4 to 6 in my area. Channel ID's 5 & 6 are not lit yet.  |
|
Nick21
join:2010-02-03
New York, NY | reply to Miruki
Upper east side on ultimate tier. |
|
Reviews:
·Time Warner Cable
| reply to bluepoint
said by bluepoint:Went up from 4 to 6 in my area. Channel ID's 5 & 6 are not lit yet.
are you sure your not having a signal issue on 333MHz and 339MHz? |
|
1 edit | I don't know, how do I check? I have rebooted the modem twice. same channels appears. |
|
kilrathi
join:2005-04-22
Rockaway Park, NY | what modem do u have cause maybe it cannot show all of them or doesnt support 8? |
|
| The modem is an Arris TG852, it's an 8X4 modem, you can see channels 7 & 8 are there but not 5 & 6. |
|
kilrathi
join:2005-04-22
Rockaway Park, NY | reply to pizz
As I said maybe that modem has some bug with displaying them properly even though it maybe locked on all of them. |
|
| reply to motorola870
said by motorola870:said by bluepoint:Went up from 4 to 6 in my area. Channel ID's 5 & 6 are not lit yet.
are you sure your not having a signal issue on 333MHz and 339MHz? You got me thinking now, why would the modem skip channels 5 & 6? As far as usability my service is solid, I really didn't need the extra channels as I'm in Turbo but just for curiosity's sake. If it was really a problem the upstream signal's power @52dBmV might be contributing to it, but like what I said, my service is solid. |
|
 swintecPremium,VIP
join:2003-12-19
Alfred, ME
kudos:4
 ·RapidVPS
 ·Sprint Mobile Br..
 ·VoicePulse
·RoadRunner Cable
| said by bluepoint:You got me thinking now, why would the modem skip channels 5 & 6?
Out of curiosity, arent the channel numbers simply a label? Who says they need to be in order? Mine shows channels 73-76...I could ask what happened to 1-72.
--
Usenet Block Accounts | Unlimited Accounts |
|
1 edit | said by swintec:said by bluepoint:You got me thinking now, why would the modem skip channels 5 & 6?
Out of curiosity, arent the channel numbers simply a label? Who says they need to be in order? Mine shows channels 73-76...I could ask what happened to 1-72. Correct but 73-76 are consecutive numbers,1-4 then 7-8 is not. If you look at the pic, the first items from 1-6 is what you call the label then the next column describes channel ID. |
|
swintecPremium,VIP
join:2003-12-19
Alfred, ME
kudos:4 Reviews:
·RapidVPS
·Sprint Mobile Br..
·VoicePulse
·RoadRunner Cable
| said by bluepoint:Correct but 73-76 are consecutive numbers. 1-4 then 7-8 is not.
Do they need to be for any technical / equipment reasons?
--
Usenet Block Accounts | Unlimited Accounts |
|
2 edits | Compare mine to Pizz, each channel ID corresponds to a frequency. They are not exchangeable, in my case the frequencies that are assigned in channels 5 & 6 are not bonding with my modem. Hence, I wonder if it's a problem or TWC in my area has not turn it on yet. |
|
| reply to pizz
Before | 
After |
 |
|
