|reply to Guspaz |
Re: [DSL] Bell FTTN 50 Mbps tier
said by Guspaz:How can you check line stats in Bell's Sagecom?
My line stats:
GAS: (removed) - In Service
Last State Change: 12/10 08:37:55 (Uptime: 221940)
Line Profile: V26944-20032_11328-2048_00011
DLM State: DISABLED | Equip. Type: OSLAM
Sync Rate: d26936.0/u11320.0 kbps
Noise Margin: d25.0/u6.0 dB
Power: d14.0/u-22.0 dB
Attenuation: d6.0/u6.0 dB (Approx. Distance: 0.43~0.67km)
Block Count: d52397296.0/u78673736.0
It'll be tight, but my attainable on the downstream is 62,641 Kbps, and I would guess a 50 meg profile would be 53,872 kbps, so I should qualify for 50/10...
said by sunnyd71:I don't know, I don't have a Sagemcom modem. Those line stats were pulled by TSI.
How can you check line stats in Bell's Sagecom?
Looks like Bell says I don't qualify for 50/10, even though my line stats say I should be able to...
Developer: Tomato/MLPPP, Linux/MLPPP, etc »fixppp.org
My Sagemcom modem had a line sync stats of 53,872 kbps down/10 in Ottawa, Carling Ave. and Moodie.
But I live next door to the old Nortel HQ, and my DSLAM is located about 800 feet from me. Also the old Nortel fiber ring passes through this community.