 dbirdmanPremium,MVM
join:2003-07-07
usa
kudos:5 | reply to grohgreg
Re: [HN7000S] Power supply question Having too much amperage available wouldn't be a problem. Voltage is most definitely an issue.
the 4000 through 7000 modems use 19.5V and 6.5V. I finally found an image online for the 9000 PS that was large enough for me to read the voltages, which were 48V and 13.5V.
Not sure why someone here couldn't tell me that if they had a PS to look at.
--
Author of hnFAP-Alert, PC-OPI and DSSatTool |
|
|
|
 grohgregDunno. Ask The Chief
join:2001-07-05
Dawson Springs, KY | reply to dbirdman
Connectors unfortunately are universal, but the voltages & amperes carried vary between/among adapters and modems. That is why it's so important to use the right power adapter with the right modem. This FAQ should help; »customer.kb.hughesnet.com/Pages/1124.aspx
//greg//
--
HN7000S - 98cm Prodelin/2w "pure" Osiris - ProPlus - G16/1001H - NOC:GTN - NAT 67.142.115.130 - Gateway 66.82.25.10 - DNS 66.82.4.12 and 66.82.4.8 - Firefox 15/MSIE9 - AV/Firewalled by NIS2012 |
|
grohgregDunno. Ask The Chief
join:2001-07-05
Dawson Springs, KY | reply to dbirdman
Duplicate post, disregard |
|
dbirdmanPremium,MVM
join:2003-07-07
usa
kudos:5 | reply to A Tech
Thanks. Since higher wattage would not be a problem, is it because different voltages are used, or is it different connector, or both?
--
Author of hnFAP-Alert, PC-OPI and DSSatTool |
|
| reply to dbirdman
Not No, But He77 no |
|
| reply to dbirdman
6000-7000 modems need 64w power supply for 1 or 2w odu. (45w were briefly shipped with the 7000 for a short time, we then replaced tham as we ran across them on repair)
9000 is 74w power supply for 1w odu. 2w odu is 110w psu i think.
1000....i forget, and im too lazy to go check my stock.
BUT, THEY ARE NOT INTERCHANGEABLE. |
|
dbirdmanPremium,MVM
join:2003-07-07
usa
kudos:5 | reply to gwalk
I don't think he did the upgrade to the 9000, but there have to be a lot of people here who did.
--
Author of hnFAP-Alert, PC-OPI and DSSatTool |
|
 gwalkPremium
join:2005-07-27
Rothbury, MI | reply to dbirdman
I guess your right, was it when they came out with the 2 watt transmitter ?
Maybe PM grohgreg , haven't seen him here in a while but he sure knows the hardware. |
|
dbirdmanPremium,MVM
join:2003-07-07
usa
kudos:5 | reply to gwalk
The 45s were a problem, but I'm not sure it happened exactly with the 6000/7000 change, and I think they went back to 64.
But that's why I asked about the wattage IF the 9000 PS would work with a 7000s
--
Author of hnFAP-Alert, PC-OPI and DSSatTool |
|
gwalkPremium
join:2005-07-27
Rothbury, MI | reply to dbirdman
Don't know about the 9000s but wasn't there an issue with the 6000/7000 change over...45watt on some vs 64 watt on the other ?
That could make a difference. |
|
dbirdmanPremium,MVM
join:2003-07-07
usa
kudos:5 | Can a 9000 power supply be used with a 7000s? If so, what is the wattage?
--
Author of hnFAP-Alert, PC-OPI and DSSatTool |
|
