dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
904
share rss forum feed

pvtpilot94
System
Premium
join:2001-11-23
Bucyrus, OH

HT1000 Anyone seeing this

Click for full size
Click for full size
Click for full size
i have been posting on the community forum and have been trying to get an answer on this from hughes, but no success.
Does anyone notice high usage on the downlink when I disconnect the LAN overnight
Here are a few screen shots.

They keep referencing that I may have a virus, wireless problem, on and on, But the LAN is disconnected.
Somehow, something is being downlinked with nothing connected to the modem,
--
HT1000 Beam 23


diablo1892
R.I.P. Donald Lee Wise

join:2011-04-21
Friendly, WV
kudos:1
Reviews:
·Frontier Communi..
·HughesNet Satell..
Click for full size
Been getting this since installation day, someday's downlink will put out green check marks and after say a couple of them, it will start throwing out something else like RTT red X's and something else along with that.. Sometimes even the uplink will show red X's and the downlink won't show a single X so I have absolutely no clue on whats going on.

All I do know is its been great weather (even right now) satellite is in good shape, transponder appears fine, plastic peace is'nt cracked, signal is up to 120 off and on, web accelerator barely goes down, connection sometimes drops out, maybe once a month.
--
HT1000/ BeamID 32/ Power Max plan/ 4 pcs on a D-Link wired switch/ wireless D-Link router with password
Support only the gaming company's that matter the most, pay for something that actually is worth buying
or has a good reason for how much it's worth.


grohgreg
Dunno. Ask The Chief

join:2001-07-05
Dawson Springs, KY
reply to pvtpilot94
Appears that modem/router connectivity has been reduced for some reason. Might be a DHCP thing. Nothing you can do about the modem, it's a fixed address. But it might be conflicting with an address (range) you have loaded into your router.

//greg//
--
HN7000S - 98cm Prodelin/2w "pure" Osiris - ProPlus - G16/1001H - NOC:GTN - NAT 67.142.115.130 - Gateway 66.82.25.10 - DNS 66.82.4.12 and 66.82.4.8 - Firefox 15/MSIE9 - AV/Firewalled by NIS2012


grohgreg
Dunno. Ask The Chief

join:2001-07-05
Dawson Springs, KY
reply to diablo1892
Mine looked like that too, every single Downlink red X associated with fragmentation errors. Quite a few other red Xs as well, but none as consistent as the Downlink. I had a 15/2 plan, but never saw anything higher than 10/1. I associate fragmentation errors with retransmissions, which in turn reduces throughput speed. After two weeks of uninterrupted red Xs, I sent back the modem and TRIA. Also faxed them a letter from the installer confirming that the issue existed on installation day. I eventually got a refund for the unused portion of the 1st months service, full hardware refund, full installation refund, $12 tax refund.

//greg//
--
HN7000S - 98cm Prodelin/2w "pure" Osiris - ProPlus - G16/1001H - NOC:GTN - NAT 67.142.115.130 - Gateway 66.82.25.10 - DNS 66.82.4.12 and 66.82.4.8 - Firefox 15/MSIE9 - AV/Firewalled by NIS2012


diablo1892
R.I.P. Donald Lee Wise

join:2011-04-21
Friendly, WV
kudos:1
Reviews:
·Frontier Communi..
·HughesNet Satell..
said by grohgreg:

Mine looked like that too, every single Downlink red X associated with fragmentation errors. Quite a few other red Xs as well, but none as consistent as the Downlink. I had a 15/2 plan, but never saw anything higher than 10/1. I associate fragmentation errors with retransmissions, which in turn reduces throughput speed. After two weeks of uninterrupted red Xs, I sent back the modem and TRIA. Also faxed them a letter from the installer confirming that the issue existed on installation day. I eventually got a refund for the unused portion of the 1st months service, full hardware refund, full installation refund, $12 tax refund.

//greg//

Here's What I do NOT get still.. CORROSIVE told me one day to try turning off web accelerator, few hours later and all red X's completely gone, nothing was wrong for about 4 hours later and it started spitting out RTT or LAN errors (or both) then i turn accelerator back on and whoa what ya know downlink red X's are back and RTT and LAN X's are gone
--
HT1000/ BeamID 32/ Power Max plan/ 4 pcs on a D-Link wired switch/ wireless D-Link router with password
Support only the gaming company's that matter the most, pay for something that actually is worth buying
or has a good reason for how much it's worth.


grohgreg
Dunno. Ask The Chief

join:2001-07-05
Dawson Springs, KY

3 edits
Well, LLRTT thresholds are 1500mm (yellow) and 2000ms (red). But I can't see why turning off WebAccel should affect conventional PING times. The protocols are different. WebAccel only accelerates HTTP, PINGs are typically ICMP. The answer might be that Hughes is using a HTTP-PING system.

That said, one of the LAN category parameters that can trigger a red X is "LAN Ping Status". Can only speculate, but maybe it's some kind of ICMP/HTTP conflict as well.

I can now also envision a possible relationship to the Downlink red Xs as well. Assuming yours were fragmentation errors like mine, it's possible that the HT1000 diagnostic software is not coping with the HTTP acceleration algorithm. As a result, the accelerated packets might be mistaken for fragmentation. In other words, a false positive. Just guessing mind you, but it seems possible to link all three categories to HTTP acceleration.

//greg//
--
HN7000S - 98cm Prodelin/2w "pure" Osiris - ProPlus - G16/1001H - NOC:GTN - NAT 67.142.115.130 - Gateway 66.82.25.10 - DNS 66.82.4.12 and 66.82.4.8 - Firefox 15/MSIE9 - AV/Firewalled by NIS2012