dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
2119
share rss forum feed

Drewskiier

join:2013-03-28
Schenectady, NY

[XP] Port forwarding ->Router-> Repeater/Router(Alfa)->Camera DV

f some can please help me. I've been working on this for several days with no luck. I also have no experience in networking. So I'm a noob.
I did some research on google and went as far as I could without getting stuck.

I'm trying to setup CCTV DVR Security Cameras in my Barn/Garage. I am getting a good wireless signal from my home with an Alfa wireless usb adapter AWUSO36H connected to a Alfa router/Repeater R36, using this as a hotspot for my garage/barn. The house has a Time Warner Cable Ubee Modem/Router.

I am getting internet with no issues but I can't access the Ethernet Network CCTV DVR Security Cameras. I did go to »www.canyouseeme.org/ and all my ports are open. ex (ports 80, 34599,10000)

Here are my settings:

(R1) Ubee Modem/Router
Gateway - Information
INTERNET SETTINGS
Internet IP Address: 67.248.xxx.xxx
Subnet Mask: 255.255.248.0
Default Gateway: 67.248.200.1
DNS:
209.18.47.61
209.18.47.62
I have Forwarded all 3 ports to 192.168.0.2
Also setup DMZ: 192.168.0.2

LOCAL SETTINGS
Gateway IP Address: 192.168.0.1
Subnet Mask: 255.255.255. 0
DHCP Server: Enabled
NAT : Enabled
Wireless Status : Enabled
Operating Mode: Gateway mode
Private IP Range: 192.168.0.3 through 192.168.0.254
Public IP Range: 0.0.0.0 through 0.0.0.0

(R2) Alfa R36 Router/Repeater
Static Wan Mode
IP Address: 192.168.0.2
Subnet Mask: 255.255.255.0 Default Gateway 192.168.0.1
Primary DNS Server 209.18.47.61 Secondary DNS Server

209.18.47.62
I have forwarded all 3 ports to 192.168.2.100
Also setup DMZ: 192.168.0.1

LAN Setup
IP Address 192.168.2.1
Subnet Mask 255.255.255.0

DHCP Setup
DHCP Server --->Enabled
Start IP Address 192.168.2.100
End IP Address 192.168.2.199

(Cameras) H.264 Network DVR
ip Address: 192.168.2.100
subnet : 255.255.255.0
GATEWAY: 192.168.2.1
Primary DNS: 209.18.47.01
Sec DNS : 209.18.47.01

my laptop works fine with this set up.
IP Address: 192.168.2.105
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DNS Servers: 209.18.47.60, 209.18.47.61
WINS Server:

My ipad and wireless Radio thermostat work fine also.

More info
Ipconfig /all
Windows IP Configuration

Host Name . . . . . . . . . . . . : GATEWAY

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected

Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller

Physical Address. . . . . . . . . : 00-03-25-xx-xx-xx

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection

Physical Address. . . . . . . . . : 00-13-CE-xx-xx-xx

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.2.105

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.2.1

DNS Servers . . . . . . . . . . . : 209.18.47.60

209.18.47.61

netstat -r
Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 03 25 xx xx xx ...... Broadcom 440x 10/100 Integrated Controller - Pa
ket Scheduler Miniport
0x40003 ...00 13 xx 79 xx xx ...... Intel(R) PRO/Wireless 2200BG Network Connection - Packet Scheduler Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.105 25
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
169.254.0.0 255.255.0.0 192.168.2.105 192.168.2.105 20
192.168.2.0 255.255.255.0 192.168.2.105 192.168.2.105 25
192.168.2.105 255.255.255.255 127.0.0.1 127.0.0.1 25
192.168.2.255 255.255.255.255 192.168.2.105 192.168.2.105 25
224.0.0.0 240.0.0.0 192.168.2.105 192.168.2.105 25
255.255.255.255 255.255.255.255 192.168.2.105 2 1
255.255.255.255 255.255.255.255 192.168.2.105 192.168.2.105 1
Default Gateway: 192.168.2.1
===========================================================================
Persistent Routes:
None


cablegeek01

join:2003-05-13
USA
kudos:1

Re: [XP] Port forwarding ->Router-> Repeater/Router(Alfa)->Camer

If I were troubleshooting it, I'd set up a laptop where the second router is, and IP it 192.168.0.2 with the 0.1 gateway, and run wireshark.
Then I'd try to access a camera from the internet, and make sure that you were seeing requests coming to 192.168.0.2. If that is working (port forwaring on the 1st router), I'd reinstall the second router, and move the laptop back to where the camera is, and use the camera IP on the laptop, and try to access the camera again, and verify that you're seeing the packets being forwarded by the second router.
If that all works, I'd then put everything back, and move back to the middle, IP my laptop as 192.168.0.1 and connect to the WAN port of the 2nd router and attempt to access the camera.
Devide and conquor.
Look at your downstream traffic first (from the internet to the camera), and then look at the upstream traffic and you'll figure out which router is not port forwarding, or blocking what it shouldn't (or the camera isn't responding etc).



cablegeek01

join:2003-05-13
USA
kudos:1

Test 01:
internet>>router1>>>Testlaptop(192.168.0.2running wireshark)

Test02:
internet>>>router1>>>router2>>>Testlaptop(192.168.2.100)

Test03:
Test laptop(192.168.0.10 w/.0.2GW)>>>>Router2>>>>DVR


Drewskiier

join:2013-03-28
Schenectady, NY
reply to cablegeek01

This is really good. I like the way you think. Sorry that this might sound ignorant but I have never used wireshark. I did dnld the program. I will have to google on how to use it.
Thx, drew



cablegeek01

join:2003-05-13
USA
kudos:1

Good luck! It's pretty straightforward, and is one of the most powerful tools that you can have in your networking toolbox. Feel free to IM me if you need a hand!


HELLFIRE
Premium
join:2009-11-25
kudos:18
reply to Drewskiier

»www.wiresharktraining.com/ is a good source of information / training.

I also recommend this title and this title if you want to get very deep into this software, but I second
cablegeek01 See Profile 's comments of this being a very powerful tool to have in your toolbox.

Regards