apilosov
join:2002-12-27
Forest Hills, NY
| reply to apilosov
Re: NYC/DirecTV Broadband Gateway reprogramming
Well, here's the thing:
You can't program the modem from CPE side. You can only program it from service provider side of the line.
I know enough about modem-gateway protocol to be able to program the modems. Since I run an ISP, I am able to do that (by running certain services on my side).
Unfortunately, at home you can't duplicate this, you need a cooperating provider... |
|
fastasican
join:2001-07-08
Atlanta, GA
| r you sure you can not reprogram the modem on the CPE (sorry, don't know what CPE stands for but I have deduced that you are talking about the end-user side of the modem) any way at one time I had found a hack that allowed one to change the modem config so that I could move from USB to Ethernet after several calls to DTVDSL customer Dis-service produced little result. I appeared that all the modem's parameters could be changed from the web interface. Would you like me to dig up the output and information on my modem or would I be wasting your time?
|
|
graysonf
Premium,MVM
join:1999-07-16
Fort Lauderdale, FL
| said by fastasican  :
.... any way at one time I had found a hack that allowed one to change the modem config so that I could move from USB to Ethernet after several calls to DTVDSL customer Dis-service produced little result. I appeared that all the modem's parameters could be changed from the web interface. Would you like me to dig up the output and information on my modem or would I be wasting your time?
All you got was the admin password for your modem, and the URL to the Admin functions page.
That allows you do do a few things such as switch the routed interface back and forth between USB, ethernet, or parallel (if your modem has that port), reboot the modem, and clear and re-download the configuration.
There is nothing in the available Admin function pages that allows arbitrary reprogramming of the modem.
And the password for your modem will not work with someone else's modem. |
|
