| Pictures of T-1 install Does anyone happen to have pictures of a T-1 installation? Basically i have a few T-1 NIU cards here..and just trying to see how they are used. |
|
|
|
 bsd9
join:2002-08-17
Pinckney, MI | I can take some pics when I get to work tomorrow.
-bsd |
|
 saber11Check SixPremium
join:2000-06-09
Clayton, OH | reply to Andy16515
The NIU cards convert a 2 wire T-1 to a 4 wire circuit at the customer prem.
The flow would go:
Copper to-->NIU-->Smartjack
NIU's are also used for for subrates, but the flow is the same. The NIU sits ahead of the smartjack which is the DEMARC point for the telco network.
Hope that helps, sorry no pics.
--
"Of the things I don't care about, you are at the front." CJ Craig, West Wing.Forum Posts:4258 |
|
 joegreenPolaroids Of Polar BearsPremium
join:2002-09-21
Galloway, NJ | reply to Andy16515
maybe oxygen can show you some pictures...he has alot of pictures...maybe some of of his connections.
--
i have a website and that website is gamercore.com. |
|
Sonson
join:2002-07-18
Toronto, ON | reply to Andy16515
I have photos from my old office with the local loop. See if it can help you. |
|
| reply to Andy16515
That was what i was looking for..now can someone explain to me how you get a T1 from just that interface?? like what are the pinouts...hookups...things like that. |
|
 tschmidtPremium,MVM
join:2000-11-12
Milford, NH
kudos:4
 ·Fairpoint Commun..
 ·Hollis Hosting
| This is the pinnout of the T1 RJ48 jack.
Everything beyond is customer premise equipment.
RJ48 Smart Jack >> CSU >> DSU >> Router
CSU Channel Service Unit
DTU Digital Service Unit
Back in the bad old days when T1 was new 1960's CSU and DTU were separate boxes. When the FCC mandated deregulation it set the 4-wire interface as the demarcation point between Telco side and customer side. Today CSU and DSU functionality is but into most T1 router made for use in the US. In Europe the DSX-1 interface is the demarcation between Telco and CPE, so the Telco owns the CSU. |
|
 OxygenTimes Square can't shine as brightPremium
join:2001-12-04
Nesconset, NY | reply to Andy16515
Here is a T1 Demarc at our office, but you've already seen it. |
|
