how-to block ads
reply to ikarus1
Re: These Ducks Quack !!! Mike: "Oh, a wise guy, ehh?"
John: "Nyuk, nyuk, nyuk *bonk* OWW!"
I just wish the implementation were up to the quality of the pix. My line of sight between the two (single-antenna) DWL-900AP+'s passes through one floor, one hallway wall, and two room walls at a 3D oblique angle (maybe about 5'x6'x15'). Resulting data rates:
1. with reflector - 2.02 Mb/s (megabit per second)
2. without reflector - 2.13 Mb/s
3. reflector backwards - 2.06 Mb/s
4. removed antenna - 1.74 Mb/s
Evidently, the situation has so much multipath, I'd be better off just walking around with a field strength meter to find a good site. (I guess this is what they mean by "hot-spot"!)
At one point I removed the antenna and covered the DWL with the dog's stainless steel waterdish. The whole thing was sitting on top of my steel-case computer with just path to air under both sides of the dish. I was still able to stream audio!
IIRC, the DWL actually does have a second internal antenna for diversity. It may have been ignoring my beautiful parabola at some points in the experiment.
said by ikarus1:
said by Just Looking9:A gentleman named ...
Hey, way cool pic, ikarus. Where'd you get it??
You ... well... I did not read the sig till I posted.
[text was edited by author 2003-03-09 00:47:39]
Anybody have real world experience with the parabolic antenna and 802.11a equipment? I have a Netgear HR314 router/access point. Love the throughput. Am disatisfied with the range. Would like to get consistent coverage on the second floor--AP on first floor where everything is fine--and get some coverage on the third floor.
Got a four pack of Pringles at the local BJs Warehouse with a dollar off coupon.
IMHO the key design issue is getting the cardboard or whatever is used to hold the parabolic reflector's shape and through which the dipole goes through. I've looked at all the pictures and am wondering if a thick piece of styrofoam could do this job. Anybody have any tips on this issue? Thanks in advance.
Am trying to avoid shooting up wires to the second and third floor of my house and/or not having to buy additional access points. Netgear is having a 50 dollar off rebate deal on their APs that expires 3-31, so I'm going to have build this and try it out before then.
The parabolic design should work on the 5 Ghz frequencies without modification. Be aware that these frequencies are inherently more susceptible to attenuation in walls, etc., than 802.11b.
The dissected pringles cans should work fine, I think, with styrofoam. But if it were me, I would look first to the EZ-12 template on the FreeAntennas.com site. I haven't built it, but it really does look easy.