zaimis
join:2003-06-28
Casa Grande, AZ
| reply to ZeToUnE
Re: WOL Through Cable Modem and Router?
I've got a little bit of a weird set up from my ISP. When I trace my public IP from my comp, it looks like this:
1 1 ms 1 ms 1 ms 192.168.0.1 (router's IP)
2 1 ms 1 ms 1 ms 172.19.24.150 (don't know what this is)
3 29 ms 13 ms 13 ms arizona.netbeam.net [216.58.148.244](public IP)
How would I go about setting this up?
Also, on my WAN IP is something weird like 10.1.1.2
Hope I provided enough info to get some help  |
|
ZeToUnE
@zenon.com | reply to Nomikal
My routeur is set up as drogue said..
But I can't make it work. |
|
Nomikal
join:2003-04-23
San Francisco, CA
| reply to ZeToUnE
I have A DSL/CABLE ROUTER(I use it for DSL) and you must configure your router(As someone stated above). And if you have an onboard NIC you might want to make sure its powered when the system is powered down(On my comp u can't tell by look at the LEDS if its powered or not).
Heres how my configuration looked when i got it to work.
[text was edited by author 2003-04-23 13:25:17] |
|
ZeToUnE
@mc.vi
| reply to kayut
Me too, I don't speak english fluently !
I have a server (windows 2000 server) and I tried to forward port UDP to the broadcast IP address, but it doesn't work. If I send magic packet from the server, the pc on lan wakes up ! but if I send it over internet, it doesn't work.
I'm using RRAS from windows 2000 server !
The ip address of the public interface is assigned by ISP DHCP server.
The ip address of the private interface is 192.168.0.1
So I tried to forwarding the following port
UDP 7 to 192.168.0.255
but the pc doesn't wake up ! I tested if the server received the magic packet, and it does ! but it seems that the PC doesn't receive the magic packet forwarded
Any idea ? |
|
