Re: WOL Through Cable Modem and Router?

Forums » ad hoc board » WOL Through Cable Modem and Router?


Share Topic:	RSS topic:	toggle: flat / full normal / watch	Post a:	Post a:

Nomikal

join:2003-04-23
San Francisco, CA

Re: WOL Through Cable Modem and Router?

I have A DSL/CABLE ROUTER(I use it for DSL) and you must configure your router(As someone stated above). And if you have an onboard NIC you might want to make sure its powered when the system is powered down(On my comp u can't tell by look at the LEDS if its powered or not).

Heres how my configuration looked when i got it to work.
[text was edited by author 2003-04-23 13:25:17]

permalink · 2003-04-23 13:21:43 · Print ·

ZeToUnE @zenon.com	Re: WOL Through Cable Modem and Router? My routeur is set up as drogue said.. But I can't make it work.
	permalink · 2003-05-01 17:00:03 ·

zaimis

join:2003-06-28
Casa Grande, AZ

Re: WOL Through Cable Modem and Router?

I've got a little bit of a weird set up from my ISP. When I trace my public IP from my comp, it looks like this:

1 1 ms 1 ms 1 ms 192.168.0.1 (router's IP)
2 1 ms 1 ms 1 ms 172.19.24.150 (don't know what this is)
3 29 ms 13 ms 13 ms arizona.netbeam.net [216.58.148.244](public IP)

How would I go about setting this up?
Also, on my WAN IP is something weird like 10.1.1.2
Hope I provided enough info to get some help

permalink · 2003-06-28 18:43:27 · Print ·

your comment..

Forums » ad hoc board


Sunday, 29-Nov 23:56:12	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. republican-creole page compression OFF