biltower
join:2000-09-04
Stevenson Ranch, CA
| reply to Sedated3
Re: Searching for Westell Diagnostic Icon
This is what i get .im using WestellB90-36R516.ALSO HOW DO I IP in i used to know but forgot 192.168.0.1 ?
[text was edited by author 2003-09-18 11:16:43]
[text was edited by author 2003-09-18 11:17:32] |
|
Sedated3
Shooting Rubberbands At The Stars
Premium
join:2002-11-02
Brooklyn, NY
clubs:
| 
Assigning a non-routable (192.168.x.y) IP to your NIC |
However if you want to assign a static IP to your network card, here's how in Windows XP:
• Click START -> Control Panel -> Network & Internet Connections -> Network Connections
• You may need to specify a primary and secondary DNS servers later on. I suggest before starting, fork to CMD, type "ipconfig/all" and write down your primary and secondary DNS addresses to be filled in later.
• Highlight the Ethernet card your Westell is connected to and select 'Properties'
• Highlight the "Internet Protocol (TCP/IP) " binding and click "Properties" again.
• Mark off "Use the following IP address" .
• Specify 192.168.0.1 (or any other non routable IP) and a subnet mask of 255.255.255.0 .
• Fill in your primary and secondary DNS servers from the earlier step.
• Click OK a few times.
HTH
If not, have you tried using both versions of the software?
»djesigns.com/upload/westell_51x_···icon.exe [larger in file size] or »https://www.westell.com/content/download···stic.exe
The software should not need a static IP assigned and will do it by itself if needed.
Regards-
--
Regards,Sed -- Anyone but Bush/Cheney 2004 -- [OOL/CVC 10.13mbps/950kbps CABLE $44.95 && Verizon 1525kbps/136kbps x 2 ADSL $29.99]::: Ride The Copper, Fly on Coax Baby! ::: |
|
biltower
join:2000-09-04
Stevenson Ranch, CA | No i was asking if thats the ip tp get in to my westell modem to look at the sync rates.im not trying to set those as my ip's.thx for the help anyway. |
|
Sedated3
Shooting Rubberbands At The Stars
Premium
join:2002-11-02
Brooklyn, NY
clubs:
| B90-36R515/516's don't have an http interface, at least that I know of, unless possibly you have Webshare/Webshare Pro [ sorry never played with one of those. ]
Try »192.168.1.254 or »launchmodem (this would be applicable to the A90-210030-04 that BellSouth provides, or the 2100 routers directly from Westell.
Here's more info (if it's of any help) »AT&T Southeast Forum FAQ »How do I open/forward ports on a Westell?
You mentioned you're using a Westell B90-36R516. I have two of it's siblings, and to the best of my knowledge, the only way to get stats from them is to use the Modem Browser.
UNLESS - Do you have Webshare or Webshare pro installed? 
Regards-
--
Regards,Sed -- Anyone but Bush/Cheney 2004 -- [OOL/CVC 10.13mbps/950kbps CABLE $44.95 && Verizon 1525kbps/136kbps x 2 ADSL $29.99]::: Ride The Copper, Fly on Coax Baby! ::: |
|
biltower
join:2000-09-04
Stevenson Ranch, CA | Yes i use the modem brouser but i only get the fireware #'s and shows me online.rec ect but not sync rates.oh well thx for your time. |
|
Sedated3
Shooting Rubberbands At The Stars
Premium
join:2002-11-02
Brooklyn, NY
clubs:
| When you run the browser, you just get one tab, right?
If so hit CTRL-ALT-F7! (the magic keystroke!)
If on the other hand, the program displays "N/A" for certain entries when running with all status entries visible, that's due to some models not providing the said metric.
There's no freeware copy, if you have such a thing I'd love to see it!
Refer to other posts on the subject. The Verizon forum FAQ has a lot of other info I and others like Dr. Dan and MikePD accumulated.
Best wishes
Sed
--
Regards,Sed -- Anyone but Bush/Cheney 2004 -- [OOL/CVC 10.13mbps/950kbps CABLE $44.95 && Verizon 1525kbps/136kbps x 2 ADSL $29.99]::: Ride The Copper, Fly on Coax Baby! ::: |
|
