NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-20 9:31 pm
[OC] I am at it again....well, I am going to playing with a new Motherboard again (an Asus P4C800-E DLX).. I will post Pics when I get the mods Done.. But the above Pic shows how I Killed my other 2 P4C800 Motherboards... The Part in the circle is Really Cracked and damaged.. Also: it lets me play with the new DigiCam |
actions · 2003-Nov-20 9:31 pm · (locked) |
noe1The Future Was Not What It Use To Be Premium Member join:2002-09-10 Charleston, WV |
noe1
Premium Member
2003-Nov-20 9:37 pm
How you crack that chip? Did it short out mobo or what? |
actions · 2003-Nov-20 9:37 pm · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-20 9:57 pm
said by noe1: How you crack that chip? Did it short out mobo or what?
Did it with the Danger Den Z-Chip Waterblock.. Thing would not stay stable and anytime I moved a water tube it would short the chip out.. It finally did it's damage though.. But, I just ordered a New Swiftech MCW-20 WB and new Hoses which will be in next week... |
actions · 2003-Nov-20 9:57 pm · (locked) |
|
MRK8 Premium Member join:2001-01-11 San Antonio, TX |
to NutCase4
Looks like you need some AMD CPU pressure pads for that. |
actions · 2003-Nov-20 10:32 pm · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-20 10:33 pm
said by MRK8: Looks like you need some AMD CPU pressure pads for that.
Yep.. The swiftech comes with the pads but the Danger Den came with nothing... |
actions · 2003-Nov-20 10:33 pm · (locked) |
hsindogg Premium Member join:2002-06-21 Potomac, MD |
to NutCase4
If you do the Vdimm Mod and Vcore mod to the P4C800-E, would you be so kind as to show off your digital camera skills and take pictures of the steps involved. |
actions · 2003-Nov-20 10:37 pm · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-21 12:31 am
ok, you wanted to see the Mods here is the Vcore stability Mod: first pic is the pot with wires connected. set this to about 28k before connecting.. second pic is the pic of where the wires connect third pic shows the full mod |
actions · 2003-Nov-21 12:31 am · (locked) |
NutCase4 |
NutCase4
Premium Member
2003-Nov-21 12:34 am
and here is the vdimm mod.. first pic is the 50k pot. set this at max resistance before connecting. second pic is the vdimm connections to motherboard.. |
actions · 2003-Nov-21 12:34 am · (locked) |
NutCase4 |
NutCase4
Premium Member
2003-Nov-21 12:37 am
and this is the fully modded board.. the abit HSF on the NB is just temp until the swiftech WB comes next week |
actions · 2003-Nov-21 12:37 am · (locked) |
NutCase4 1 edit |
NutCase4
Premium Member
2003-Nov-21 2:27 am
and here is it's first run.. This Baby is going to hit 7K no Problem forgot Stats... P4C800-E Deluxe Rev 2.00 P4 2.4C SL6WF Cpu OCZ PC4000 Gold (2x256MB) Memory Swiftech MCW-5000P WB and system water chilled.. Note: Time to build the Raid array and test it.. (2 80GB Seagate Barracuda 7200.7 SATA drives) |
actions · 2003-Nov-21 2:27 am · (locked) |
hsindogg Premium Member join:2002-06-21 Potomac, MD |
to NutCase4
Thanks for the pics...does it matter how long the wires are...or do you make them long enough to move the VR out of the way?
I so want to do the mod...I just don't want to fubar my board with 0 soddering skills. |
actions · 2003-Nov-21 9:03 am · (locked) |
noe1The Future Was Not What It Use To Be Premium Member join:2002-09-10 Charleston, WV |
to NutCase4
You make it look so easy amigo, way to go! |
actions · 2003-Nov-21 9:20 am · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
to hsindogg
said by hsindogg: Thanks for the pics...does it matter how long the wires are...or do you make them long enough to move the VR out of the way?
I so want to do the mod...I just don't want to fubar my board with 0 soddering skills.
Wire Length does not matter.. just get them long enough to mount the pots in a good location that has easy access. |
actions · 2003-Nov-21 12:52 pm · (locked) |
NutCase4 |
to noe1
said by noe1: You make it look so easy amigo, way to go!
Nahh.. Just got lucky and got a Good Cpu and memory |
actions · 2003-Nov-21 12:53 pm · (locked) |
NutCase4 |
NutCase4
Premium Member
2003-Nov-21 3:03 pm
Ok, here is the Raid array Benchmark and PCmark score.. The array is 2 80GB Seagate Barracuda 7200.7 SATA150 Drives in Raid 0 (people, this is almost the same drive I am giving away for the Modding contest) FSB is 285 @ 1:1 ratio |
actions · 2003-Nov-21 3:03 pm · (locked) |
NutCase4 |
NutCase4
Premium Member
2003-Nov-21 4:19 pm
ok.. here is max right now.. Running Prime95 right now..Raised Vdimm to 3.3V... |
actions · 2003-Nov-21 4:19 pm · (locked) |
|
to NutCase4
where do you find mods for motherboards? |
actions · 2003-Nov-21 4:54 pm · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-21 5:01 pm
the pics above in this thread are for any Asus P4C800 Motherboard... I get most of my Mods from Extreme systems and here is a link to them.. » www.xtremesystems.org/fo ··· rumid=83 |
actions · 2003-Nov-21 5:01 pm · (locked) |
NutCase4 |
NutCase4
Premium Member
2003-Nov-21 5:35 pm
and here is the Unbuffered Benchmark: |
actions · 2003-Nov-21 5:35 pm · (locked) |
noe1The Future Was Not What It Use To Be Premium Member join:2002-09-10 Charleston, WV |
noe1
Premium Member
2003-Nov-21 8:07 pm
Tell me agin Mr hag6br, which blocks to uncheck when runnin' unbuffered benchie? |
actions · 2003-Nov-21 8:07 pm · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-21 8:28 pm
said by noe1: Tell me agin Mr hag6br, which blocks to uncheck when runnin' unbuffered benchie?
here is the blocks to Uncheck that MrSpec3 posted a bit ago: |
actions · 2003-Nov-21 8:28 pm · (locked) |
noe1The Future Was Not What It Use To Be Premium Member join:2002-09-10 Charleston, WV |
to NutCase4
Dam, with those settings I only get 2327 with my FX. |
actions · 2003-Nov-21 8:35 pm · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-21 8:42 pm
said by noe1: Dam, with those settings I only get 2327 with my FX.
yep.. The unbuffered benchmark takes a big drop in them |
actions · 2003-Nov-21 8:42 pm · (locked) |
Badger3kWe Don't Need No Stinkin Badgers Premium Member join:2001-09-27 Franklin, OH |
to NutCase4
said by NutCase4: ok.. here is max right now.. Running Prime95 right now..Raised Vdimm to 3.3V...
Are you using Prime95 to condition everything? I would love to use something in Windows to condition, not that memtest86 isn't easy to use. |
actions · 2003-Nov-22 12:34 am · (locked) |
chmod Premium Member join:2000-12-12 Lockport, IL |
to NutCase4
Beautiful work and scores there hag. Cant wait to see some watercooling results! |
actions · 2003-Nov-22 8:42 am · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
to Badger3k
I use Prime95, Seti@home and a Beta program I am testing for burn in inside windows...
another is Sandra Burn In wizard does a good job.. |
actions · 2003-Nov-22 11:12 am · (locked) |
NutCase4 |
to chmod
said by chmod: Beautiful work and scores there hag. Cant wait to see some watercooling results!
That is water cooled (at least on the cpu ).. Just found out I won't get the new NB Waterblock until Dec 1st |
actions · 2003-Nov-22 11:13 am · (locked) |
chmod Premium Member join:2000-12-12 Lockport, IL |
chmod
Premium Member
2003-Nov-22 11:28 am
said by NutCase4:
said by chmod: Beautiful work and scores there hag. Cant wait to see some watercooling results!
That is water cooled (at least on the cpu ).. Just found out I won't get the new NB Waterblock until Dec 1st
oops thats what you get for reading too quick. nice job none the least. |
actions · 2003-Nov-22 11:28 am · (locked) |
likwidkool Premium Member join:2002-05-05 Jersey City, NJ |
to NutCase4
hey hag for vdimm mod the VR needs to be set at 50K? I haven't been able to find the exact ohms I need to set it for. Plus I only have a 10K VR here which I do not believe will do the job, but then again mrspec said he did his p4p800 with a 1K VR. I need to find somewhere local that carries 50K VR's. I spent all morning calling places in the yellow pages, but none sold them. Rat Shack only has the 10K ones, and there is no Fry's within 100K miles!;)
Sorry to cloud up your thread with questions, but I am sitting here ready to fire up the iron, but I don't want to kill the board cause I used the wrong VR! |
actions · 2003-Nov-22 3:09 pm · (locked) |
NutCase4Mad Overclocker Premium Member join:2001-12-10 Livermore, CA |
NutCase4
Premium Member
2003-Nov-22 3:15 pm
A 10K might work But I doubt if you will get the voltage under 3.2V when set at max in Bios.. It took about 15 Turns down on the pot to get it to 3.3V and this is a 25 Turn pot, So a 10K Might work out Fine.. I always set it at max to keep from cooking anything |
actions · 2003-Nov-22 3:15 pm · (locked) |