GDBNight
join:2003-12-16
Charleston, WV
| reply to ChocoDough
Re: How to forward port 113 on a Westell 2200?
This sounds similar to a problem I had. Go to the 2200 config page, log in, and go to Service Configuration. In the sevice name field scroll down to "My new Service". Click on enable, then a window pops up saying "Host service", click on OK. You should then see a window with your Host device or ip address choice. You should see a window to add your ports. From what you posted you'll need to port " from 113 to 113" with "base host" port set to 113 also. I didnt need to add an ip so I clicked Done. You should then see the new service added in the Service Configuration listings. Next I had to go to the bottom of the page and click on static NAT, click on it and add this ip, 192.168.1.47, click done/close. Close out of the 2200 config page and try your software. I havn't tried this with a Linksys router yet so YMMV, but I'm getting ready to do the same thing. Hope this helps. |
