FoMoCo
466 C.I.D.
join:2001-01-10
Grand Rapids, MI
| reply to MikegotOOL
Re: [W98] USB Mouse rec. as "Unknown usb device"
I didn't think you could use the 4 x software for a 3x mouse.Thought I read that there when I was using my ms optical.
--
When life becomes a drag - floor it - Galaxie 500 |
|
Sweet Witch
Be the flame, not the moth.
Premium,MVM
join:2003-07-15
Gallifrey | reply to MikegotOOL
Does anything else work in the port? What does your device manager say about the USB ports? Are they enabled in the BIOS? Did you install the drivers first or the mouse first? |
|
MikegotOOL
join:2001-01-21
East Setauket, NY
clubs: | reply to janderso1
yes it has. It may have the header you speak of, for a serial port attachment, but I cannot find the attachment. |
|
janderso1
Jim
Premium,MVM
join:2000-04-15
Saint Petersburg, FL | reply to MikegotOOL
It should have at least one header for a serial port. If it is that old, a current PCI card may not work. Has it ever worked with a mouse?
--
Jim Anderson |
|
MikegotOOL
join:2001-01-21
East Setauket, NY
clubs:
1 edit | reply to janderso1
This is an old system. It is a k62-300 w/ 128MB ram. Yes, the mobo is a POS, and yes the person who "owns" it doesn;t want to spend any amt. of $$$ fixing it. This comp. was/is still soo fuked up lol.
--
If they give you ruled paper,
write the other way. -Juan Ramon Jimenez
Lightpath introduces the Goldenrebever;)
(Seti is dead, Project Phoenix is alive now, Big Brother is watching)
Although this is coming off a clean install of win98se.... |
|
janderso1
Jim
Premium,MVM
join:2000-04-15
Saint Petersburg, FL
| reply to MikegotOOL
Ok, what do you have? Is it a new system that you are trying to dual boot to 98? The Dell laptop that I am using doesn’t have PS2 or serial ports, but its bios makes the mouse look like a PS2 to DOS mouse drivers. So if it is a new motherboard, it is most likely a BIOS setup/BIOS problem.
--
Jim Anderson |
|
BlitzenZeus
Burnt Out Cynic
Premium,MVM
join:2000-01-13
Beaverton, OR
 ·Verizon FIOS
 ·Verizon Online DSL
| reply to Shootist
said by Shootist  :
What the heck type of MB doesn't have PS2 or serial ports???
A cheap pos  |
|
MikegotOOL
join:2001-01-21
East Setauket, NY
clubs: | reply to Shootist
I installed 4.12. |
|
Shootist
Premium
join:2003-02-10
Decatur, GA
| reply to MikegotOOL
What the heck type of MB doesn't have PS2 or serial ports???
Anyway, If you DLed Intellipoint 5 mouse drivers they are the worst you need 4.1 or 4.12.
Here's a link for 4.12
»www.microsoft.com/hardware/oempa···load.asp
--
Are You Ready--Stand By BEEP ******** |
|
MikegotOOL
join:2001-01-21
East Setauket, NY
clubs:
1 edit | reply to janderso1
the mobo does not have ps2 or serial ports. |
|
janderso1
Jim
Premium,MVM
join:2000-04-15
Saint Petersburg, FL
| reply to MikegotOOL
Why do you want to use a USB mouse with 98? Your computer should have a PS2 port and most USB mouse devices have a USB to PS2 adapter. If you need to make it work try turning on/off USB legacy support in your BIOS.
--
Jim Anderson |
|
MikegotOOL
join:2001-01-21
East Setauket, NY
clubs: | reply to janderso1
Well, it was a microsoft intellimouse explorer 3.0....so I dl'ed the software off of microsoft's website and installed.....and still doesn't go. |
|
janderso1
Jim
Premium,MVM
join:2000-04-15
Saint Petersburg, FL | reply to MikegotOOL
Did Windows 98 drivers come with the mouse? If so, have you installed them?
--
Jim Anderson |
|
MikegotOOL
join:2001-01-21
East Setauket, NY
clubs:
1 edit | reply to BlitzenZeus
I have a PCI to USB card installed and the mouse is USB. |
|
BlitzenZeus
Burnt Out Cynic
Premium,MVM
join:2000-01-13
Beaverton, OR | reply to MikegotOOL
pci to usb? Do you mean ps2 to usb? The fact is most mice cannot have their connection converted unless it was already supported by the device itself. |
|
MikegotOOL
join:2001-01-21
East Setauket, NY
clubs:
| I have a microsoft mouse and a PCI to USB (Opti) adapter. The adapter installs fine, but it recognizes the mouse as an unknow usb device. I have tried DL'ing the Microsoft fix for it to no avail. I have uninstalled it, reinstalled it, several times, and it still says code 10 "unknow usb device". Why oh why does it not recognize the mouse?
--
If they give you ruled paper, write the other way. -Juan Ramon Jimenez Lightpath introduces the Goldenrebever;)(Seti is dead, Project Phoenix is alive now, Big Brother is watching) |
|
