FOUND IT... It was a video problem!!!

Forums » Up and Running » Wireless Networking » Update on my wireless link to get broadband


Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:

Links: ·Forum Guidelines ·FAQ-Wireless Networking ·Computer Crime Laws by State

What could I use to boost my wireless signal.. »
« Good 80211.g strength, but no connection?

vincent9993 join:2001-08-14 Montreal, QC	FOUND IT... It was a video problem!!! This morning I woke up to a broken bridge. I walked around the building and found that I was getting a great deal of inteference. Source: Lorex wireless video camera and monitor! I'll start a different thread to talk about this but I am happy to report that I now have a strong link between my 2 DWL900AP+ and I am getting a 2Mbps internet connection.
	permalink · 2004-01-01 14:44:18 ·

vincent9993

join:2001-08-14
Montreal, QC

Now what?

Had the setup working fine, then this week-end it died.

I could only attribute it to fog. But that was not the case. It looks like Point_A may have failled somehow. It started with a great deal of lost packets and now the bridge is completly down. When I setup the APs as Access Points I can pickup Point_B's signal at Point_A's location with my laptop and Orinoco card but I cannot pickup Point_A's signal at point_B.

When in bridge mode, Point_A sent opackets are all dropped.

I tried reloading firmware/resetting and re-config. Nothing worked. I am led to believe a faulty antenna could be the problem. I've got one on order.

Any other suggestions welcomed.
Thanks

permalink · 2004-01-05 07:07:44 · Print ·

(topic locked)

Forums » Up and Running » Wireless Networking	What could I use to boost my wireless signal.. » « Good 80211.g strength, but no connection?


Wednesday, 02-Dec 10:50:55	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF