ken5
join:2003-08-20
Princeton Junction, NJ
| TrueVector Errors
Howdy!!
I am using XP Pro and Zone Alarm and under administrative tools/ event viewer I see there are a lot of “TrueVector service” errors.
The errors are that:
TrueVector engine File IAMDB.RDB" was corrupt and has been copied to a different file and that it has been deleted.
IAMDB.RDB was being restored from backup.
TrueVector engine File computername.ldb" was corrupt and has been copied to a different file and that it too has been deleted.
Anyone get these or know why I am getting them? Could it be another side effect of running in “limited user?”
Thanks
Ken
|
|
ironwalker
World Renowned
Premium,MVM
join:2001-08-31
Keansburg, NJ
clubs: |  No,its not a side affect of limited user...this is all i can offer on your question atm.....but i will say tis the reason i dropped ZA. |
|
Keizer
I'M Your Huckleberry
Premium,MVM
join:2003-01-20 | reply to ken5
Going off what I have read in the past on this issue, you want to do the following.
Go to C>Windows>Internet logs. Clear the contents of the folder, and then re-boot.
Keizer |
|
marti
Color outside the lines
Premium,MVM
join:2001-12-14
Houston, TX
clubs:
| reply to ken5
It's possible that your settings are corrupt. This is the correct way to remove them:»www.zonelabs.com/store/content/s···10issues
Note that you will have to re-do all custom settings.
If it were me, I would run some other tests to see if the settings are really corrupt. For example, set a program that you have set to auto-access to "ask." If that works, then you may have another problem. Does ZA ever shut down? As in a red X through the icon on the system tray?
--
*Team Z* Member
**PCQ&A Forum** |
|
BCA2812
join:2001-02-27
Louisville, KY | I know its a bit of trouble, but you can disable Zone Alarm before shutdown, standby, or restart and reenable it when you turn your computer back on and you will not see those three errors in the log. BCA |
|
ken5
join:2003-08-20
Princeton Junction, NJ
| reply to marti
Thanks for the prompt reply guys! 
I will delete the settings and see if that helps. I already uninstalled and reinstalled ZA and that did not help, but I'll give it a try.
ZA seems to running normally and prgrams do ask for access. ZA does not shut down, as a red x in the tray, though a few times I did have to reboot to get internet access.
Ken. |
|
ken5
join:2003-08-20
Princeton Junction, NJ
| reply to BCA2812
Hi BCA,
Are you saying that this is caused by shutdowns, standbys, or restarts? Honestly I do not know what the computer is doing when these errors occur, but I do know that I do not get them for each standby, shutdown, or restart. If it is normal and the program is running correctly then I don't care about the messages themself being there.
Ken. |
|
