behlers join:2003-04-04 San Luis Obispo, CA |
Localnet 2B configurationI have a pipeline 75 that I would like to use with Localnet. I think I have the correct configuration but I can only get the first channel to connect. Any suggestions?
The config looks like this:
START=SYSTEM=0=0 Name=local net user id goes here - hidden for posting Location=2020 Happy Trails Rd SLO CA 93405 Contact=bob@hautespot.net Remote Mgmt=No END=SYSTEM=0=0 START=SAPFILT=200=0 END=SAPFILT=200=0 START=SAPFILT=200=1 END=SAPFILT=200=1 START=IPXROUTE=200=0 END=IPXROUTE=200=0 START=IPXROUTE=200=1 END=IPXROUTE=200=1 START=DUALPOTS=400=0 END=DUALPOTS=400=0 START=FRELAY=200=0 END=FRELAY=200=0 START=BRIDGE=200=0 END=BRIDGE=200=0 START=BRIDGE=200=1 END=BRIDGE=200=1 START=BRIDGE=200=2 END=BRIDGE=200=2 START=BRIDGE=200=3 END=BRIDGE=200=3 START=BRIDGE=200=4 END=BRIDGE=200=4 START=BRIDGE=200=5 END=BRIDGE=200=5 START=BRIDGE=200=6 END=BRIDGE=200=6 START=BRIDGE=200=7 END=BRIDGE=200=7 START=FILT=200=0 Name=no spoofing In filter 01...Valid=Yes In filter 01...Type=IP In filter 01...Generic...Forward=Yes In filter 01...Ip...Forward=Yes In filter 01...Ip...Dst Mask=255.255.255.255 In filter 01...Ip...Dst Adrs=192.168.100.20 In filter 01...Ip...Protocol=6 In filter 01...Ip...Dst Port Cmp=Eql In filter 01...Ip...Dst Port #=80 In filter 01...Ipx...Forward=Yes In filter 02...Valid=Yes In filter 02...Type=IP In filter 02...Generic...Forward=Yes In filter 02...Ip...Forward=Yes In filter 02...Ip...Dst Mask=255.255.255.255 In filter 02...Ip...Dst Adrs=192.168.100.20 In filter 02...Ip...Protocol=6 In filter 02...Ip...Dst Port Cmp=Eql In filter 02...Ip...Dst Port #=443 In filter 02...Ipx...Forward=Yes In filter 03...Valid=Yes In filter 03...Type=IP In filter 03...Ip...Src Mask=255.255.255.0 In filter 03...Ip...Src Adrs=192.168.100.0 In filter 04...Valid=Yes In filter 04...Type=IP In filter 04...Ip...Src Mask=255.0.0.0 In filter 04...Ip...Src Adrs=127.0.0.0 In filter 05...Valid=Yes In filter 05...Type=IP In filter 05...Generic...Forward=Yes In filter 05...Ip...Forward=Yes In filter 05...Ipx...Forward=Yes Out filter 01...Valid=Yes Out filter 01...Type=IP Out filter 01...Generic...Forward=Yes Out filter 01...Ip...Forward=Yes Out filter 01...Ip...Src Mask=255.255.255.0 Out filter 01...Ip...Src Adrs=192.168.100.0 Out filter 01...Ipx...Forward=Yes END=FILT=200=0 START=FILT=200=1 Out filter 01...Generic...Offset=14 Out filter 01...Generic...Length=3 Out filter 01...Generic...Mask=ffffff0000000000 Out filter 01...Generic...Value=e0e0030000000000 Out filter 01...Generic...More=Yes Out filter 02...Generic...Offset=27 Out filter 02...Generic...Length=8 Out filter 02...Generic...Mask=ffffffffffffffff Out filter 02...Generic...Value=ffffffffffff0452 Out filter 02...Generic...More=Yes Out filter 03...Generic...Offset=47 Out filter 03...Generic...Length=2 Out filter 03...Generic...Mask=ffff000000000000 Out filter 03...Generic...Value=0002000000000000 Out filter 04...Generic...Offset=12 Out filter 04...Generic...Length=4 Out filter 04...Generic...Mask=fc00ffff00000000 Out filter 04...Generic...Value=0000ffff00000000 Out filter 04...Generic...More=Yes Out filter 05...Generic...Offset=24 Out filter 05...Generic...Length=8 Out filter 05...Generic...Mask=ffffffffffffffff Out filter 05...Generic...Value=ffffffffffff0452 Out filter 05...Generic...More=Yes Out filter 06...Generic...Offset=44 Out filter 06...Generic...Length=2 Out filter 06...Generic...Mask=ffff000000000000 Out filter 06...Generic...Value=0002000000000000 Out filter 07...Generic...Forward=Yes Out filter 07...Ip...Forward=Yes Out filter 07...Ipx...Forward=Yes END=FILT=200=1 START=FILT=200=2 Out filter 01...Generic...Offset=14 Out filter 01...Generic...Length=8 Out filter 01...Generic...Mask=ffffff000000ffff Out filter 01...Generic...Value=aaaa03000000809b Out filter 01...Generic...More=Yes Out filter 02...Generic...Offset=32 Out filter 02...Generic...Length=3 Out filter 02...Generic...Mask=ffffff0000000000 Out filter 02...Generic...Value=0404040000000000 Out filter 03...Generic...Offset=12 Out filter 03...Generic...Length=2 Out filter 03...Generic...Mask=ffff000000000000 Out filter 03...Generic...Value=809b000000000000 Out filter 03...Generic...More=Yes Out filter 04...Generic...Offset=24 Out filter 04...Generic...Length=3 Out filter 04...Generic...Mask=ffffff0000000000 Out filter 04...Generic...Value=0404040000000000 Out filter 05...Generic...Forward=Yes Out filter 05...Ip...Forward=Yes Out filter 05...Ipx...Forward=Yes END=FILT=200=2 START=ROUTE=200=0 Name=Default Active=Yes Gateway=207.251.201.231 Metric=1 Private=Yes END=ROUTE=200=0 START=ROUTE=200=1 END=ROUTE=200=1 START=ROUTE=200=2 END=ROUTE=200=2 START=ROUTE=200=3 END=ROUTE=200=3 START=CONN=200=0 PPP options...Route IP=Yes PPP options...Bridge=No END=CONN=200=0 START=CONN=200=1 Station=localnet.com Active=Yes Dial #=18058880115 Calling #=Hidden for posting Called #=18058880115 Route IP=Yes Bridge=No Encaps options...Send Auth=PAP Encaps options...Send PW=*SECURE* Encaps options...DBA Monitor=Transmit Encaps options...Base Ch Count=2 Encaps options...Min Ch Count=2 Ip options...LAN Adrs=207.251.201.231/24 Ip options...Client Pri DNS=207.251.201.10 Ip options...Client Sec DNS=207.251.201.11 Session options...Idle=0 Telco options...AnsOrig=Call Only Telco options...Call Type=Perm/Switched Telco options...Data Svc=64K END=CONN=200=1 START=CONN=200=2 Dial #=18059256950 Route IP=Yes END=CONN=200=2 START=CONN=200=3 END=CONN=200=3 START=CONN=200=4 END=CONN=200=4 START=CONN=200=5 END=CONN=200=5 START=CONN=200=6 END=CONN=200=6 START=CONN=200=7 END=CONN=200=7 START=CONN=200=8 END=CONN=200=8 START=NAT=200=0 Routing=Yes Profile=localnet.com Static Map 01...Valid=Yes Static Map 01...Dst Port #=21 Static Map 01...Loc Port #=21 Static Map 01...Loc Adrs=192.168.100.20 Static Map 02...Valid=Yes Static Map 02...Dst Port #=23 Static Map 02...Loc Port #=23 Static Map 02...Loc Adrs=192.168.100.20 Static Map 03...Valid=Yes Static Map 03...Loc Port #=25 Static Map 03...Loc Adrs=192.168.100.20 Static Map 04...Valid=Yes Static Map 04...Dst Port #=80 Static Map 04...Loc Port #=80 Static Map 04...Loc Adrs=192.168.100.20 Static Map 05...Valid=Yes Static Map 05...Dst Port #=110 Static Map 05...Loc Port #=110 Static Map 05...Loc Adrs=192.168.100.20 Static Map 06...Valid=Yes Static Map 06...Dst Port #=443 Static Map 06...Loc Port #=443 Static Map 06...Loc Adrs=192.168.100.20 Static Map 07...Valid=Yes Static Map 07...Dst Port #=3389 Static Map 07...Loc Port #=3389 Static Map 07...Loc Adrs=192.168.100.20 END=NAT=200=0 START=TRAP=200=0 END=TRAP=200=0 START=TRAP=200=1 END=TRAP=200=1 START=FWALL=200=0 fwdata=0 END=FWALL=200=0 START=FWALL=200=1 fwdata=0 END=FWALL=200=1 START=FWALL=200=2 fwdata=0 END=FWALL=200=2 START=SECURITY=0=0 Name=Default Operations=No Edit Security=No Edit System=No Field Service=No END=SECURITY=0=0 START=SECURITY=0=1 Name=behlers Passwd=*SECURE* END=SECURITY=0=1 START=SECURITY=0=2 Name=Full Access Passwd=*SECURE* END=SECURITY=0=2 START=ETHERNET=200=0 Ether options...IP Adrs=192.168.100.100/24 Ether options...RIP=Off Ether options...Proxy Mode=Off SNMP options...R/W Comm Enable=No Bridging=No IPX Routing=No RIP Summary=No NAT Routing=Yes NAT Profile=localnet.com DHCP Client=Yes DHCP Spoofing...DHCP Spoofing=No DHCP Spoofing...DHCP PNP Enabled=No DHCP Spoofing...IP Group 1=192.168.1.0/24 DNS...Domain Name=localnet.com DNS...Sec Domain Name=hautespot.net DNS...Pri DNS=207.251.201.10 DNS...Sec DNS=207.251.201.11 DNS...List Attempt=Yes DNS...Client Pri DNS=65.174.63.3 DNS...Client Sec DNS=207.174.171.33 Multicast...Forwarding=Yes Log...Log Host=Hidden for posting END=ETHERNET=200=0 START=LINE=100=0 Name=Factory Switch Type=NI-1 Line 1...Link Type=Multi_P Line 1...Pri Num=Hidden for posting Line 1...Pri SPID=Hidden for posting Line 1...Sec Num=Hidden for posting Line 1...Sec SPID=Hidden for posting END=LINE=100=0 START=LINE=100=1 END=LINE=100=1 END DOWNLOAD |
actions · 2004-Jan-26 7:08 pm · (locked) |
ljoe join:2002-08-03 Pearland, TX |
ljoe
Member
2004-Jan-28 11:57 am
I don't know your level of expertise. Refer to the Lucent Start Here Guide and use telnet at the dos prompt to set the Pipeline.
If you don't have the docs, refer to my Lucent Ascend Pipeline 75 post 2004-01-14 15:47:38 for links to the docs.
Joe |
actions · 2004-Jan-28 11:57 am · (locked) |
behlers join:2003-04-04 San Luis Obispo, CA |
Thanks Joe, but I have all the documentation for my P75. I have all the manuals that came with it, along with the Ascend docs for the verions of firmware on my box. The real question was about configurations with Localnet. They have no details on their configuration...do they use PPP or MPP? Do they use PAP or CHAP? Do they just limit users to one channel? Are their some networks that they use that allow 2b?
Still stuck. |
actions · 2004-Jan-29 2:05 am · (locked) |
ljoe join:2002-08-03 Pearland, TX |
to behlers
I went to LocalNet's site, terms of service state "LocalNet does not permit users to be logged on to our service using multiple simultaneous connections. " To me this means they do not support 2 connections, meaning ISDN. For 2 channel ISDN 2B+1D to work you have to have 2 connections (SPIDS). Unless it is hidden, it looks like LocalNet does not support ISDN. Their site indicates they have 56K analog and cable available.
Suggest you look for ISP elsewhere, expect to pay $20+ per month for the ISP, you won't get ISDN for $5.95 per month.
Joe |
actions · 2004-Jan-29 12:32 pm · (locked) |
|
Well Localnet DOES support ISDN. Just contacted them just can't get a answer on 1ch or 2 ch. For 9.95 it's not a bad deal if its 2 channel.
"Currently, we do have local dial up numbers in your area. The service is unlimited access, and ISDN is also available for the connection lines.
Thank you, LocalNet Customer Service 1-888-488-7265 Hours: Monday-Friday: 8:00 AM - 11:00 PM Saturday & Sunday: 8:30 AM - 8:00 PM" |
actions · 2004-Feb-5 12:43 pm · (locked) |
|
I have been using Localnet with 2 channel ISDN for 2 months now (Eastern TN) with it up almost 24 hours a day. It has only gone out and not worked twice for about 1-2 hours each time. |
actions · 2004-Feb-6 3:17 am · (locked) |