paloke
join:2004-04-14
Spain
| reply to paloke
DWL-2100AP vs Conceptronic C54APT
Hello,
Reading my message, I make mistake, the AP to which I talk about is the dwl-2100ap instead of DWL-2000AP+.
Somebody has the DLW-2100AP telnet command list?
Thanks.
Paloke |
|
Ivan_K
join:2002-02-24
Edgewater, FL | such C54APT |
|
sTEELER77
join:2004-04-28
germany
| reply to paloke
I hacked a around a little here and there and found out that the C54APT is the same machine then the DWL2100AP ! In the first flashupdate for C54APT you can find a DLINK Ascii string that made me think about the possibility that the C54APT could be an OEM Version of a DLINK machine - and it seems to be true:
I hacked the original configuration tool from Dlink to make it work with C54APT:
»ftp://ftp.dlink.com/Wireless/dwl2100AP···_100.exe
save the attached ascii file as "system.ini" and copy it to the install dir:
Now you C54APT will be recognized by the software.
I have plenty of problems with my C54APT and I really wonder if there are people out there that can help. When trying to connect to a DWL900AP+ with my C54APT as a client the connection always gets interrupted when DWL is in "automode". We have to force the Wlan Settings of the DWL900AP+ to 11mbit to establish a reliable connection.
When in Auto mode the connection runs for about 5-10 seconds, gets interrupted (C54APT reconnects to right SSID again) runs for another 5 seconds to get interrupted again. (ping and Telnet check shows all that)
Anyone out there with the same experience?
But now for the "hack":
---snip
[Main Form]
ST_ModuleName.Visible=true
LeftImage.Picture=Singleleftbar.bmp
MainForm.Icon=Singlewlapmupg.ico
Application.Icon=Singlewlapmupg.ico
MainForm.Caption=C108AP
[System Form]
LabelModule.Visible=true
CBoxModule.Visible=true
[About Form]
LB_ProgramName.Caption=C108AP AP Manager
DeviceImage.Picture=Singlewlapmupg.ico
LB_Version.Caption=Version 1.00 (Build 2003/10/29 R02)
[System]
DiapSetTimeout=20
DefRebootTime=20
ConfigUploadTime=30
ConfigDownloadTime=30
ConfigFlashUpdateTime=60
FactoryResetTime=60
FWDownloadTime=60
FWFlashUpdateTime=60
TimingTolerance=5
Module=C108AP
DiapWirelessAP=0DC6B75C74EF70F001000000
Filter=0
DiscoveryTimeout=7
DiscoveryRetry=1
CountryId=eu
RebootTime=20
[Module Form]
C108AP=Config_DWL_7000_B
[Config_DWL_7000_B]
PanelInter11a11g.Visible=true
PanelPartition11a.Visible=true
PanelPartition11g.Left=10
PanelPartition11g.Top=15
GBox11aAcl.Visible=true
GBox11gAcl.Left=15
GBox11gAcl.Width=507
GBoxAPMode11a.Visible=true
GBoxAPMode11g.Left=15
GBoxAPMode11g.Width=507
GBox11aWLan.Visible=false
GBox11gWLan.Top=9
GBox11aSecurity.Visible=false
GBox11gSecurity.Top=4
GBoxGroup.Visible=false
GBoxTelnet.Top=132
---snap
Have phun,
sTEELER77 |
|
tronity2k
join:2004-04-23
08913
|  C54APT descriptions:
conceptronic C54APT: (108Mbps)
Chipset/micro: Atheros AR2312A (wlan AR2112A) (32-bit MIPS R4000-class processor)
»english.aopen.com.tw/products/ne···i891.htm
»www.atheros.com/pt/AR5002AP-GBulletin.htm
Flash: AMD Am29LV320DR (32Mbits - 4Mb)
»www.amd.com/us-en/FlashMemory/Pr···,00.html
SDRAM: HY57V281620HCT-H (16Mb, PC 133)
»www.hynix.co.kr/datasheet/pdf/dr···(L)T.PDF
Otro: IC Plus IP101 (¿Ethernet Controller?)
»www.icplus.com.tw/Data/TestRepor···0926.pdf
»www.icplus.com.tw/Data/TestRepor···0926.pdf
I already have the binary ones that has the AP inside; those that ls shows to the ls command via telnet.
apcfg 3641
apcfg.bak 3641
apimg1 942464
backup 818826
art 628948
ap39_b09.sys 268048
798720 bytes free
Two board conectors:
14 pins ¿JTAG?
12 pins ¿UART noy conected?
voltages of 14 pins connector:
0,395v = 1, 3, 7
0,01v = 2, 4, 5, 6, 8, 9, 10 (GND)
3,26v = 11
NC = 12, 13, 14
Discovered ocult commands:
set overridetxpower xx (tx valor 1-24 dB)
WLAN Access Point wlan1 -> set abolt 0
Abolt: 0x0
¿?
Thnaks
SGaleano |
|
jordi-bcn
@Red-80-33-204.pooles
| fcc id of dwl-2100ap
KA2
20030603014-1
in fcc.gov you can retrieve pdf with internal photos of it, the same pdf shows the box of the d-link and conceptronics.
it was funny that when you do a strings of the firmware it shows d-link , now we know why xDD |
|
sTEELER77
join:2004-04-28
germany
| reply to paloke
HACKING Conceptronic C54APT to DWL-2100AP
Dudes! GREAT NEWS... I recently hacked my conceptronic CP54APT to a dwl-2100ap. Now the DLink firmware works flawless on my AP...
Here´s a step by step introduction how to manage the firmware upgrade:
(1)
Download the following files to your computer:
»www.conceptronic.net/drivers/Con···08AP.tfp
»www.conceptronic.net/drivers/Con···_FTP.exe
»www.conceptronic.net/drivers/Con···_MAN.exe
»www.conceptronic.net/drivers/Con···r025.tfp
»tsd.dlink.com.tw/info.nsf/2eca71···Document
»tsd.dlink.com.tw/info.nsf/2eca71···Document
2) Skip this part if you already have firmware V1 on your CP54APT and advance to chapter (3) NOW If you don´t have firmware v1 flash your system with the webinterface like you are used to
(3) System should be rebooted to v1 now. Please go to the flash webinterface again and choose C54APT_FW_2_C108AP.tfp as flash file. Press UPDATE - now count 6 seconds and strip the electricity from your AP (yes! during the flash procedure!) If you were not fast ebough flash back to v1 again.
(4) Replug the power cord back to the AP. Enter the usual webinterface (you should remember the IP). The system is now in FAILED state and is ready for an emergency flash  That´s how we like it!
(5) Unpack C54APT_UTL_FTP.exe and C54APT_UTL_FTP_MAN.exe and read the manual carefully. Set up the TFTP Server as described there. But now choose the downloaded DLink Firmware as flash file. After flashing the file and a short
reboot the AP will salute you as a brandnew DWL2100AP...
Credits go to Dakota who published this info on his spanish wireless site »www.barcelonawireless.net |
|
DakotaBcn
@menta.net
| Hello!
I am Dakota (Yes, the autor of original spanish mail of barcelonawireless)
The procedure work for chnage the Dlink FW to conceptronic FW
i have probed migrate this sequence
Concep 1.06EU-R85 -> Dlink 1.01EU -> Concep 1.06-R95 -> Dlink 1.02 USA 
i have received emails from users of C54APT whit failure of hacking the C54APT, i am investigated the problem and the problem is C54AP remarked to C54APT!!!
Thanks for the translation of english, mi next hack is install Linux into this AP... i need help!
regards
pd: sorry for my bad english  |
|
Pulsar2
join:2004-02-08
90332
| chnage the Dlink FW to conceptronic FW
Is the conceptronic firmware better?
Can I still connect to DWL2100ap if I change one of my 2100ap to conceptronic firmware? |
|
