New Zywall 10W firmware 3.62(WH.13)CO has been released.

---click to download from the zyxel FTP site---

---

The release notes lists the following bug fixes:

Features:
Modifications in V 3.62(WH.13) | 09/26/2005
Modify for formal release
Modifications in V 3.62(WH.13)b1 | 08/31/2005
1. [BUG FIX]
Symptom: Idle timeout of ZW10W in PPPoE cannot work.
Condition:
1. Set WAN1 as PPPoE
2. Set Idle Timeout(sec) as 30
3. Set CI command>sys rn pingcheck 1 to enable "check connectivity".
4. Pull up any cables except WAN on the ZyWALL
5. Wait 30 secs and the status of WAN in Menu 24-1 cannot show "idle" but
it should.
2. [BUG FIX] 050708497
Symptom: Linux Traceroute will fail.
Condition:
1. PC use Linux.
2. When use traceroute command, the ZyWALL 10W will treat the general packet
as attacked packet and drop it.
3. [BUG FIX] 050717875
Symptom: PPPoE Dynamic IP DNS can’t update.
Condition:
PC -- DUT -- PQA LAB
1. Reset default Rom file, and WAN get Ethernet DHCP IP, check device DNS ”ip
dns status display” get DNS ”192.168.11.4” ”168.95.1.1”
2. Use SMT 11.1 change Encapsulation to PPPoE with dynamic IP, and check device
DNS ”ip dns status display” it not be update.
3. Reboot device check device DNS ”ip dns status display” it will become
”192.168.11.4” ”192.168.10.4” (Right).
4. [FEATURE CHANGE]
Ping check flag is changed to 0 when resetting router.
Note: 1. User can use CI command to change it (“sys rn ping 0/1”, 0 for off, 1 for
on).
2. This flag is run time only, when router reboot, it changed to default value.