dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
400

NetDog
Premium Member
join:2002-03-04
Hollywood, FL

2 edits

3 recommendations

NetDog to gkeawe

Premium Member

to gkeawe

[Modem] Re: [ALL] SB6190 is a terrible modem - Intel Puma 6 / MaxLinear mistake

Both of these are the same modem, same CMTS and on a production CMTS from my house..
here is the n-code



here is the x-code

Datalink
Premium Member
join:2014-08-11
Ottawa ON

Datalink

Premium Member

Netdog, what protocol is displayed on the plots?

NetDog
Premium Member
join:2002-03-04
Hollywood, FL

NetDog

Premium Member

That was ICMP.. I had issues getting TCP or UDP working on the pingplotter..
Datalink
Premium Member
join:2014-08-11
Ottawa ON

2 edits

Datalink

Premium Member

Thanks. TCP/IP and UDP has been directed to the hardware processor as well? The easiest way to test TCP/IP and UDP would be to have a server connected to the same CMTS, configured for the correct responses. With that type of test configuration, any latency would be due to the modems at the test client and test server end plus a minimal amount due to the CMTS. If you can configure the CMTS to respond to TCP/IP and UDP pings, and just use the CMTS for a test target for all protocols, all the better.