Bell Canada → Re: [TV] Fibe PVR VIP5662: problems connecting

No, at least not a few days ago. All that blinking happens while it's showing "Fibe TV" on the TV. I edited my original post to include a link to a video showing the lights blinking and the TV. I feel like it didn't get to the point of asking for configuration. If I end up checking it, I'll take the PVR and a small TV to the modem to see if it recognizes a network cable.

Try rebooting the modem (ie just pull the power plug fro a few minutes). (in-laws had same issue - fixed it).

I'll get them to try that. In your case, was the WiFi still working on other devices? Ours is, in this case. Thanks.

Yes, perfectly, even with a Zoom call while we discussed the issue and solutions over cocktails!

Same experience in this case (though no zoom+cocktails). WiFi was working, PVR not. Power cycled HH3000 and PVR working. Didn't have to call Bell (a fate worse than death, or at least worse than not having TV).

Thanks for your solution.

Also Thanks HCKev for the ideas, if I'd been there I'd have moved the PVR into the other room and hooked it up to the modem directly.