dslreports logo
lorennerol
Premium Member
join:2003-10-29
Seattle, WA

lorennerol to Link Logger

Premium Member

to Link Logger

Re: Content filtering glitch

It does still say registered.

The only log entry of note is what I mentioned: Something to the effect of my content filtering being disabled because my subscription had expired.

I'm bummed that you'd reported this, but tech support seemed completely unaware of the issue.

-L

Link Logger
MVM
join:2001-03-29
Calgary, AB

Link Logger

MVM

It probably hasn't made it down to tech support yet as they (meaning the engineers) are likely still looking into this to see what is causing the problem so they can give a solution or work around to the tech support guys. I suspect they will have something soon as I know they are working on it as we speak (working hours in Taiwan).

Blake

bbarrera
MVM
join:2000-10-23
Sacramento, CA

bbarrera to lorennerol

MVM

to lorennerol
said by lorennerol:
The only log entry of note is what I mentioned: Something to the effect of my content filtering being disabled because my subscription had expired.
My notes say the same happened to me with a Silver Card (didn't do trial). I disabled and reenabled content filtering and it started working immediately.

Also, when registering with Silver Card I had choice of picking today or tomorrow (this was last week, forgot exact dates). At first I chose today and after hitting submit button it said that was invalid date. Set it for tomorrow and registration completed successfully. Sorry I don't have more detailed notes. As I said, sounds similar to your experience. Try disabling then enabling CF and see if it starts working. I had it working within a couple minutes. Hope that helps.
lorennerol
Premium Member
join:2003-10-29
Seattle, WA

lorennerol

Premium Member

said by bbarrera:
said by lorennerol:
Try disabling then enabling CF and see if it starts working. I had it working within a couple minutes. Hope that helps.

I tried that while I was there and it didn't work.

I also set it up for AES, and now can't get into it remotely (Error vailidating Proxy IDs). So it will have to wait until tomorrow. Hopefully it will start working without significant hassle.

Thanks for the help!

-L